Re: Where did the Fedora 8 CVS go to?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2007-07-04 at 17:52 +0200, Mark wrote:
> Thanx for the reply but i'm stuck after step 10.
> after step 10 it says: "You may then proceed as usual."
> and what is that? is that make rpm? or rpmbuild in some special location?
> 
> the notice below step 10 says: "Normally, kernels for Fedora are built
> using the rpmbuild utility and a specfile. Your results may vary if
> you use the kernel's built-in make rpm target." but that doesn't
> answer the question.to me it indicates that both make rpm and rpmbuild
> are possible.. but than again.. where can i do rpmbuild on the kernel?
> 
> That documentation should be expanded with the full guide for making a rpm.
> 
It depends on what you want to do.  Your question seemed to be: How do I
get "rpmbuild -ba kernel-2.6.spec" to produce kernel rpms.  The answer
is:
  rpmbuild -ba --target $(uname -m) kernel-2.6.spec

I should have made it clearer in my original reply that the
"--target...." was the only thing you needed to get from that page.

If you want to make modifications to the kernel spec file, then the rest
of that page becomes relevant.

-Toshio

> 2007/7/4, Toshio Kuratomi <a.badger@xxxxxxxxx>:
> > On Wed, 2007-07-04 at 16:28 +0200, Mark wrote:
> > > oke.. now i'm having a little more complex question also about the kernel.
> > > when i do: "rpmbuild -ba kernel-2.6.spec" i get this output within
> > > about a minute:
> > >
> > > Wrote: /usr/src/redhat/SRPMS/kernel-2.6.21-1.3228.fc7.src.rpm
> > > Wrote: /usr/src/redhat/RPMS/i386/kernel-headers-2.6.21-1.3228.fc7.i386.rpm
> > >
> > > (this was tested with the F7 kernel source but i also tested it with
> > > the F8 kernel source. both have the same result as above.. just
> > > another version)
> > >
> > > and more but that's what i want to know. now when running the rpmbuild
> > > line i expected the full kernel to be compiled.. not just the headers
> > > and the source rpm. so the question is: how do i compile the kernel
> > > the fedora way?
> > >
> > > or is this the way how it should be done:
> > > http://www.howtoforge.com/kernel_compilation_fedora if that's the case
> > > i will just follow that tutorial. but this (couldn't find it on the
> > > wiki) is important information to get in the fedora wiki.
> > >
> > > And the reason why i want to have this new kernel is mainly because
> > > iwl (whatever the name was) just the wireless drivers that should be
> > > alot more stable in this kernel than in 2.6.21
> > >
> >
> > This will help you::
> > http://docs.fedoraproject.org/release-notes/fc6/en_US/sn-Kernel.html
> >
> > In your specific case you're missing the --target $(uname -m)
> >
> > -Toshio
> >
> > --
> > fedora-devel-list mailing list
> > fedora-devel-list@xxxxxxxxxx
> > https://www.redhat.com/mailman/listinfo/fedora-devel-list
> >
> >
> 

Attachment: signature.asc
Description: This is a digitally signed message part

-- 
fedora-devel-list mailing list
fedora-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/fedora-devel-list

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Fedora Announce]     [Fedora Kernel]     [Fedora Testing]     [Fedora Formulas]     [Fedora PHP Devel]     [Kernel Development]     [Fedora Legacy]     [Fedora Maintainers]     [Fedora Desktop]     [PAM]     [Red Hat Development]     [Gimp]     [Yosemite News]
  Powered by Linux