I've now managed to get past my problem with the Hardware Kill Swicth
(see earlier threads).
After a "setkeycodes e004 147" I am able to use Fn-F2 to disable the
kill switch.
Still not sure how to do this permanently though.
With kernel-2.6.21-1.3189.fc7 I can then modprobe iwl3945 and I actually
do get an wlan0 interface, but I do get some errors:
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for
Linux, 0.0.16kd
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:02:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
iwl3945: Error sending POWER_TABLE_CMD: time out after 500ms.
iwl3945: Error sending POWER_TABLE_CMD: time out after 500ms.
iwl3945: Error sending BT_CONFIG: time out after 500ms.
iwl3945: Error sending RXON: time out after 500ms.
iwl3945: Error setting new configuration (-110).
hwcrypto disabled!
hwcrypto disabled!
And I am not able to get the interface up:
# ifconfig wlan0 up
SIOCSIFFLAGS: Input/output error
With kernel-2.6.21-1.3194.fc7 I do not get any error messages (I get the
same "channel FOO is tx only" but I guess that is not a problem), but
the interface wlan0 does not show up at all.
- Only eth0 and lo is available even with ifconfig -a
Thanks for the hard work.
--
_,--', _._.--._____
.--.--';_'-.', ";_ _.,-' Ola Thoresen
.'--'. _.' {`'-;_ .-.>.'
'-:_ ) / `' '=. It is easier to fix Unix
) > {_/, /~) than to live with Windows
|/ `^ .'
--
fedora-devel-list mailing list
fedora-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/fedora-devel-list
