I would suggest a configuration issue, not a bug. The kernel config for 2.6.9 - 681 shows: CONFIG_SERIAL_8250=y ... CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y ... CONFIG_SERIAL-8250_MULTIPORT=y The default configuration between Red Hat 9 and Fedora Core 3 at the kernel level has changed. Your configuration is a bit different than what is normally used in other words. On Fri, 31 Dec 2004 20:15:09 -0500, Jerry Geis <geisj@xxxxxxxxxxxxxxx> wrote: > All > > I just installed FC3 from Redhat 9. I have a quatech multiport card with > 8 ports. > Under redhat 9 there was no problem card was detect and I had ports 4 - 11. > Under FC3 the card is detected but the order of the ports is ALL messed up. > I am attempt to change the CONFIG_SERIAL_8250_NR_UARTS to 24. > I am recompiling the kernel now. I chose 24 to support 3 - 8 port serial > cards. > > Is this a configuration bug or oversite or what is going on that my 8 > port multiport > card is not supported that worked fine under redhat 9. > > THanks, > > Jerry > > -- > fedora-devel-list mailing list > fedora-devel-list@xxxxxxxxxx > http://www.redhat.com/mailman/listinfo/fedora-devel-list > -- Nick Bargnesi http://www.den-4.com Den 4 Software pub 1024D/E8BD2FD0 2004-12-02 Nick Bargnesi <nbargnesi@xxxxxxxxx> Key fingerprint = 6F9D 9404 63CD 2B04 DE7A 0F9D A1ED C1B0 E8BD 2FD0 sub 2048g/56C5D45B 2004-12-02
