Hello, I have two fully updated F20 boxes running VMs. The bridging on one box was working but not on the other... It appeared the only real difference was the names. The working bridge was call 'br0' and the non-working was called 'bridge0' I also notice that 'br0' showed virt-manager's list of viable network interfaces and 'bridge0' did not. Obviously that was the problem. So tried to rename bridge0 to br0 by changing the names of the ifcfg files... no luck... the bridge would not come up. Next I just remove 'bridge0' and create a new 'br0'. This is where I hit the wall. 1) Network setup will no longer gives an option to create a bridge as it once did. The only option I get is VPN. 2) I am able to create a bridge with nm-connection-editor but Network setup still can't see it to bring it up 3) Using the nmcli command to bring the bridge up, I get the following error: # nmcli con up "br0 slave 1" still errors out with Error: Connection activation failed: No compatible disconnected device found for master connection 157112b2-aea3-4b03-b91e-186bcffbb3f4. So I went from a functioning bridge not being recognized by virt-manager to not being able bring a bridge up or have it recognized by Network Setup. Any ideas what is going on here? Again, this is on a fully updated F20 box... tia! steved. -- devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/devel Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
