2011/12/29 Sérgio Basto <sergio@xxxxxxxxxx>: > On Thu, 2011-12-29 at 08:32 +0530, Kalpa Pathum Welivitigoda wrote: >> 2011/12/29 Sérgio Basto <sergio@xxxxxxxxxx>: >> > On Mon, 2011-12-26 at 09:59 +0530, Kalpa Pathum Welivitigoda wrote: >> >> > I had use: >> >> > system-config-printer >> >> > >> >> > to configure my epson stylus color in parallel port. >> >> > >> >> >> >> I put URI as paralle:/dev/lp0 and driver as Epson 24-pin recommended >> >> and now it is working. >> > >> > I just check and for the record I use : >> > parallel:/dev/lp0 >> > >> >> yeah it's the same for me. But something I noticed is that when >> printing the font of the printer is changed from the default font. >> (The LED indicating the default font changes to some other font.) and >> the printout is not that clear also. This may be due the recommended >> 24-pin driver which may not be the exactly suitable driver for the >> printer. > > well, I got the exact drive for mine printer, and yes could be o wrong > drive. > For EPSON LQ 300, we don't have that exact model, but near models > normally are the same drive, with a little luck, I would try LQ 500 , > 570+ (because the +) , LQ-2550 (may be LQ-255 more or less) > In my case both the printers are Epson LQ-300+ II. For the moment 24-pin recommended driver are used for them both. I should try a near model. > Best regards, >> > -- >> > Sérgio M. B. >> > >> >> >> > > -- > Sérgio M. B. > -- Best Regards, Kalpa Pathum Welivitigoda http://fedoraproject.org/wiki/User:Callkalpa http://about.me/callkalpa -- devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/devel
