On Thu, 2011-12-29 at 08:32 +0530, Kalpa Pathum Welivitigoda wrote: > 2011/12/29 Sérgio Basto <sergio@xxxxxxxxxx>: > > On Mon, 2011-12-26 at 09:59 +0530, Kalpa Pathum Welivitigoda wrote: > >> > I had use: > >> > system-config-printer > >> > > >> > to configure my epson stylus color in parallel port. > >> > > >> > >> I put URI as paralle:/dev/lp0 and driver as Epson 24-pin recommended > >> and now it is working. > > > > I just check and for the record I use : > > parallel:/dev/lp0 > > > > yeah it's the same for me. But something I noticed is that when > printing the font of the printer is changed from the default font. > (The LED indicating the default font changes to some other font.) and > the printout is not that clear also. This may be due the recommended > 24-pin driver which may not be the exactly suitable driver for the > printer. I got the exact drive for mine printer, and yes could be a wrong drive. For EPSON LQ 300, we don't have the drive for that exact model, but near models normally are the same drive, with a little luck. I would try LQ 500 , 570+ (because the +) , LQ-2550 (may be LQ-255 more or less) and or one model above. Best regards :), > > -- > > Sérgio M. B. > > > > > -- Sérgio M. B. -- devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/devel
