For some time the wifi drivers have been moving away from even WEP AP mode in kernel. Is it possible to get hostapd as a package with a compile configuration similar to the attached one? Thank you, Trever Adams -- "Magazines all too frequently lead to books and should be regarded by the prudent as the heavy petting of literature." -- Fran Lebowitz
# Example hostapd build time configuration # # This file lists the configuration options that are used when building the # hostapd binary. All lines starting with # are ignored. Configuration option # lines must be commented out complete, if they are not to be included, i.e., # just setting VARIABLE=n is not disabling that variable. # # This file is included in Makefile, so variables like CFLAGS and LIBS can also # be modified from here. In most cass, these lines should use += in order not # to override previous values of the variables. # Driver interface for Host AP driver CONFIG_DRIVER_HOSTAP=y # Driver interface for wired authenticator #CONFIG_DRIVER_WIRED=y # Driver interface for madwifi driver #CONFIG_DRIVER_MADWIFI=y #CFLAGS += -I../../madwifi # change to the madwifi source directory # Driver interface for Prism54 driver #CONFIG_DRIVER_PRISM54=y # Driver interface for drivers using the nl80211 kernel interface CONFIG_DRIVER_NL80211=y # driver_nl80211.c requires a rather new libnl (version 1.1) which may not be # shipped with your distribution yet. If that is the case, you need to build # newer libnl version and point the hostapd build to use it. #LIBNL=/usr/src/libnl #CFLAGS += -I$(LIBNL)/include #LIBS += -L$(LIBNL)/lib # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) #CONFIG_DRIVER_BSD=y #CFLAGS += -I/usr/local/include #LIBS += -L/usr/local/lib # Driver interface for no driver (e.g., RADIUS server only) #CONFIG_DRIVER_NONE=y # IEEE 802.11F/IAPP CONFIG_IAPP=y # WPA2/IEEE 802.11i RSN pre-authentication CONFIG_RSN_PREAUTH=y # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) CONFIG_PEERKEY=y # IEEE 802.11w (management frame protection) # This version is an experimental implementation based on IEEE 802.11w/D1.0 # draft and is subject to change since the standard has not yet been finalized. # Driver support is also needed for IEEE 802.11w. #CONFIG_IEEE80211W=y # Integrated EAP server CONFIG_EAP=y # EAP-MD5 for the integrated EAP server CONFIG_EAP_MD5=y # EAP-TLS for the integrated EAP server CONFIG_EAP_TLS=y # EAP-MSCHAPv2 for the integrated EAP server CONFIG_EAP_MSCHAPV2=y # EAP-PEAP for the integrated EAP server CONFIG_EAP_PEAP=y # EAP-GTC for the integrated EAP server CONFIG_EAP_GTC=y # EAP-TTLS for the integrated EAP server CONFIG_EAP_TTLS=y # EAP-SIM for the integrated EAP server CONFIG_EAP_SIM=y # EAP-AKA for the integrated EAP server CONFIG_EAP_AKA=y # EAP-AKA' for the integrated EAP server # This requires CONFIG_EAP_AKA to be enabled, too. CONFIG_EAP_AKA_PRIME=y # EAP-PAX for the integrated EAP server CONFIG_EAP_PAX=y # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) CONFIG_EAP_PSK=y # EAP-SAKE for the integrated EAP server CONFIG_EAP_SAKE=y # EAP-GPSK for the integrated EAP server CONFIG_EAP_GPSK=y # Include support for optional SHA256 cipher suite in EAP-GPSK CONFIG_EAP_GPSK_SHA256=y # EAP-FAST for the integrated EAP server # Note: Default OpenSSL package does not include support for all the # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) # to add the needed functions. CONFIG_EAP_FAST=y # Wi-Fi Protected Setup (WPS) #CONFIG_WPS=y # Enable UPnP support for external WPS Registrars #CONFIG_WPS_UPNP=y # EAP-IKEv2 CONFIG_EAP_IKEV2=y # Trusted Network Connect (EAP-TNC) CONFIG_EAP_TNC=y # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) CONFIG_PKCS12=y # RADIUS authentication server. This provides access to the integrated EAP # server from external hosts using RADIUS. #CONFIG_RADIUS_SERVER=y # Build IPv6 support for RADIUS operations CONFIG_IPV6=y # IEEE Std 802.11r-2008 (Fast BSS Transition) CONFIG_IEEE80211R=y # Use the hostapd's IEEE 802.11 authentication (ACL), but without # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) #CONFIG_DRIVER_RADIUS_ACL=y # IEEE 802.11n (High Throughput) support CONFIG_IEEE80211N=y # Remove debugging code that is printing out debug messages to stdout. # This can be used to reduce the size of the hostapd considerably if debugging # code is not needed. #CONFIG_NO_STDOUT_DEBUG=y
Attachment:
signature.asc
Description: OpenPGP digital signature
-- fedora-devel-list mailing list fedora-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-devel-list
