Jakub, That did the trick. I removed the unused rectangles in the baseplate, repositioned the icons, and reran the python script. A tarball with the src/ and rendered gnome/ paths can be downloaded here... http://xorengineering.com/dev/icons/system-config-boot-icon.tgz If the work is acceptable for ticket #99 then I'll start looking for another ticket. Bryan On Mon, Oct 11, 2010 at 12:28 PM, Jakub Steiner <jsteiner@xxxxxxxxxx> wrote: > > ----- "Bryan Nielsen" <bnielsen1965@xxxxxxxxx> wrote: > >> I did a little more tweaking on the icons to add more contrast and >> improve the radius on the blue screen... >> http://xorengineering.com/dev/icons/ >> >> At this point I need a little direction on the use of the >> render-icon-theme.py script. I used an existing icon source file as a >> reference to create my system-config-boot.svg file but when I run the >> script some of the icons are off center. > > Hi Bryan, > the script uses the rectangles in the baseplate layer to "clip" the icons. The second smallest rectangle actually has two overlaid ones -- one icon is used for both 24x24 and 22x22, so either nuke the 22x22 size, or make sure your icon doesn't get clipped for the 22x22. > > Hope this helps > > -- > Jakub Steiner > http://jimmac.musichall.cz > _______________________________________________ > design-team mailing list > design-team@xxxxxxxxxxxxxxxxxxxxxxx > https://admin.fedoraproject.org/mailman/listinfo/design-team > _______________________________________________ design-team mailing list design-team@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/design-team
