Re: kjounald takes too much cpu

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I just had the time to upgrade to kernel 2.4.18-10 and
the system works much better. 
Thank you very much,

			Marcelo.



On Friday 23 August 2002 01:01 am, you wrote:
> > The problem I have now is similar to previous posts in this list before,
>
> but I
>
> > couldn't find the solution. If the solution is there, please refer me to
> > that, and I apologize for not being able to find it.
> >
> > I recently installed RH7.3, with ext3 fs, on several identical computers.
> > The processor is AMD 1900+, the motherboard is ASUS A7V266-C,
> > and the hard drive is a Maxtor 40GB, 7200 rpm. 512 MB memory.
> >
> > The problem appears when I run a large program, that needs to
> > dump a lot of data to the disk. "kjournald" starts to take cpu
> > and then my program must share the cpu. Consequently,
> > my program needs a longer real time tu run.
> >
> > Is this normal?
> > How can I get the ext3 fs to perform as well as the ext2 fs?
> > It is necessary to do some 'tuning' on the ext3fs?
>
>   I've hade similar problem. Upgrading kernel from 2.4.18-3 to
> 2.4.18-5 fixed it.
>
>   Mindaugas



_______________________________________________

Ext3-users@redhat.com
https://listman.redhat.com/mailman/listinfo/ext3-users

[Index of Archives]         [Linux RAID]     [Kernel Development]     [Red Hat Install]     [Video 4 Linux]     [Postgresql]     [Fedora]     [Gimp]     [Yosemite News]

  Powered by Linux