Oops kernel (2.4.18) on Sparc32

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

There is not enough infomation to give any help. Can you please paste
the kernel panic message decode by ksymsoops?

Chris

On Thu, 28 Feb 2002, BERTRAND [ISO-8859-15] Joël wrote:

>     Hello,
> 
>     I have recompiled a Linux 2.4.18 kernel on my Sparc and I receive 
> some oops when quick disk access are performed. For example : I download 
> some files on a local server with ncftp (-TR directory), and ncftp hangs 
> up (with kernel oops !). I cannot umount the device and I must reboot 
> the station.
> 
>     For information, my sparc is a SparcStation 5 (85 MHz) with 160 
> Mbytes and 3 SCSI disks formatted in ext3 :
> Disk /dev/sda (Sun disk label): 67 heads, 62 sectors, 1007 cylinders
> Units = cylinders of 4154 * 512 bytes
> 
>    Device Flag    Start       End    Blocks   Id  System
> /dev/sda1             0      1007   2091539   83  Linux native
> /dev/sda3             0      1007   2091539    5  Whole disk
> 
> Disk /dev/sdb (Sun disk label): 67 heads, 62 sectors, 1007 cylinders
> Units = cylinders of 4154 * 512 bytes
> 
>    Device Flag    Start       End    Blocks   Id  System
> /dev/sdb1             0        31     64387   83  Linux native
> /dev/sdb2  u         31       157    261702   82  Linux swap
> /dev/sdb3             0      1007   2091539    5  Whole disk
> /dev/sdb4           157      1007   1765450   83  Linux native
> 
> Disk /dev/sdc (Sun disk label): 133 heads, 62 sectors, 1018 cylinders
> Units = cylinders of 8246 * 512 bytes
> 
>    Device Flag    Start       End    Blocks   Id  System
> /dev/sdc1             0      1018   4197214   83  Linux native
> /dev/sdc3             0      1018   4197214    5  Whole disk
> 
> Local Kepler:[/export/laplace/cnam] > cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
>   Vendor: SEAGATE  Model: ST32550W         Rev: 5108
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 03 Lun: 00
>   Vendor: SEAGATE  Model: ST32550W         Rev: 5108
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 05 Lun: 00
>   Vendor: SEAGATE  Model: ST15150W         Rev: 5110
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> 
>     I use the same kernel on an alpha XP900 which is a fileserver 
> without any trouble.
> 
>     Regards,
> 
>     JKB
> 
> 
> 
> 
> _______________________________________________
> 
> Ext3-users@redhat.com
> https://listman.redhat.com/mailman/listinfo/ext3-users
> 





[Index of Archives]         [Linux RAID]     [Kernel Development]     [Red Hat Install]     [Video 4 Linux]     [Postgresql]     [Fedora]     [Gimp]     [Yosemite News]

  Powered by Linux