On 18 August 2015 at 04:04, Hauke Mehrtens <hauke@xxxxxxxxxx> wrote: > On 08/08/2015 07:01 PM, Hauke Mehrtens wrote: >> These patches are adding support for outputting 2560x1440@56 over HDMI. >> This needs a pixel clock of 225 MHz which was not supported before. >> >> This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and >> one HDMI monitor running with 2560x1440@56 and one DVI monitor running >> with 1920x1200@60. This still needs testing on other graphics cards and >> with dual link DVI. Out of curiosity, what mode does the VBIOS select to display the system's boot messages? Ben. >> >> There is no Maintainers entry for nouveau. >> >> Hauke Mehrtens (2): >> drm/nouveau: activate dual link TMDS links only when possible >> drm/nouveau: increase max pixel clock to 225 MHZ for HDMI >> >> drivers/gpu/drm/nouveau/nouveau_connector.c | 6 ++++-- >> drivers/gpu/drm/nouveau/nv50_display.c | 8 ++++---- >> drivers/gpu/drm/nouveau/nvkm/engine/disp/gf110.c | 2 +- >> drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c | 2 +- >> 4 files changed, 10 insertions(+), 8 deletions(-) >> > > > Hi Ben, > > Some people in the IRC suggested you should look at these patches. > > There are still some parts in the code with something like "if > (pixel_lock > 165MHz)", I haven't changed that because that did not > affected me and I do not know in which situations this gets called. > > Hauke > _______________________________________________ > Nouveau mailing list > Nouveau@xxxxxxxxxxxxxxxxxxxxx > http://lists.freedesktop.org/mailman/listinfo/nouveau _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
