On 08/08/2015 07:01 PM, Hauke Mehrtens wrote: > These patches are adding support for outputting 2560x1440@56 over HDMI. > This needs a pixel clock of 225 MHz which was not supported before. > > This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and > one HDMI monitor running with 2560x1440@56 and one DVI monitor running > with 1920x1200@60. This still needs testing on other graphics cards and > with dual link DVI. > > There is no Maintainers entry for nouveau. > > Hauke Mehrtens (2): > drm/nouveau: activate dual link TMDS links only when possible > drm/nouveau: increase max pixel clock to 225 MHZ for HDMI > > drivers/gpu/drm/nouveau/nouveau_connector.c | 6 ++++-- > drivers/gpu/drm/nouveau/nv50_display.c | 8 ++++---- > drivers/gpu/drm/nouveau/nvkm/engine/disp/gf110.c | 2 +- > drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c | 2 +- > 4 files changed, 10 insertions(+), 8 deletions(-) > Hi Ben, Some people in the IRC suggested you should look at these patches. There are still some parts in the code with something like "if (pixel_lock > 165MHz)", I haven't changed that because that did not affected me and I do not know in which situations this gets called. Hauke _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
