Re: R200 DRM/KMS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2015-07-06 at 23:26 +0200, Daniel Vetter wrote:
> On Mon, Jul 06, 2015 at 09:06:28PM +0100, Steven Newbury wrote:
> > On Mon, 2015-07-06 at 15:42 -0400, Alex Deucher wrote:
> > > On Mon, Jul 6, 2015 at 2:40 PM, Steven Newbury <
> > > steve@xxxxxxxxxxxxxxx
> > > > wrote:
> > > > On Mon, 2015-07-06 at 12:25 -0400, Alex Deucher wrote:
> > > > > On Mon, Jul 6, 2015 at 9:39 AM, Steven Newbury <
> > > > > steve@xxxxxxxxxxxxxxx
> > > > > > wrote:
> > > > > > Hi,
> > > > > > I've been trying to get DRM/KMS working with the current 
> > > > > > graphics
> > > > > > stack (xf86-video-ati 7.5, xserver-1.17) on a R200 series 
> > > > > > card.  I
> > > > > > assumed this should be working since KMS was implemented 
> > > > > > for 
> > > > > > it a
> > > > > > while back, and it has been working with xf86-video-ati
> > > > > > -6.x.
> > > > > > 
> > > > > > Unfortunately, it doesn't seem to work.
> > > > > > 
> > > > > > I've narrowed it down to drmSetInterfaceVersion() failing 
> > > > > > when
> > > > > > called
> > > > > > from the ATI driver (in radeon_kms.c).  This is a bit 
> > > > > > strange
> > > > > > since,
> > > > > > /sys/class/drm/version correctly reports 1.1.0 20060810. 
> > > > > >  Presuably
> > > > > > it's getting the correct fd for the DRM master otherwise 
> > > > > > it 
> > > > > > should
> > > > > > bail earlier?
> > > > > > 
> > > > > > 
> > > > > > Googling confirms others have had the same issue, and 
> > > > > > generally the
> > > > > > resolution has been to stick with the old driver.
> > > > > > 
> > > > > > Should this be working?  Is it known to be broken?
> > > > > 
> > > > > It should be working.  Make sure the kernel driver has kms 
> > > > > enabled,
> > > > > firmware available, and that the kernel driver is loaded 
> > > > > before
> > > > > starting X.  If the kernel driver is not loaded before X 
> > > > > starts 
> > > > > you
> > > > > can get a version mis-match error.
> > > > 
> > > > Yes, using Gentoos 4.1.1 kernel, driver is definitely loaded, 
> > > > with
> > > > modeset=1, which is working, all sysfs entries are there.  gdm 
> > > > manages
> > > > to fall back to starting up an X session without using DRM 
> > > > swrast
> > > > -only, not something you want to experience on such a weak CPU!
> > > > 
> > > 
> > > If the kernel driver loads properly and you get a kms console you
> > > should be good to go.
> > > 
> > > > Manually starting X fails with the "[drm] failed to set drm 
> > > > interface
> > > > version." error.
> > > > 
> > > 
> > > Maybe the ddx with that old system was build without KMS support?
> > Everything is freshly compiled.  The error itself is coming from
> > radeon_kms.c:651 in the ddx.
> 
> Do you have latest libdrm? We might have accidentally broken this 
> for very
> old versions of libdrm (although surprising this would compile with
> everything else).
> -Daniel

It's the latest in portage:


x11-libs/libdrm-2.4.62::gentoo  USE="libkms -static-libs -valgrind"VIDEO_CARDS="radeon (-exynos) (-freedreno) -intel -nouveau (-omap) (-tegra) -vmware"

I'll know tomorrow whether downgrading works, if not, I'm suspecting it's a compiler bug.  I have wondered though how much testing R200 could be getting with the latest stack.


If it is a mis-compile, I guess it must be either in libdrm or the ddx
- hopefully, at least that shouldn't mean too much compiling!

Slightly off topic, I'm curious whether R200 could be used with
Wayland.  How difficult/possible would it be to get R200 working with
gles1? Obviously, gles2 would be a non-starter given it's OpenGL1.3
hardware.  Would gles1 be sufficient to run a Wayland compositor, I'm
guessing probably not..?

Attachment: signature.asc
Description: This is a digitally signed message part

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux