On Mon, Jul 06, 2015 at 09:06:28PM +0100, Steven Newbury wrote: > On Mon, 2015-07-06 at 15:42 -0400, Alex Deucher wrote: > > On Mon, Jul 6, 2015 at 2:40 PM, Steven Newbury <steve@xxxxxxxxxxxxxxx > > > wrote: > > > On Mon, 2015-07-06 at 12:25 -0400, Alex Deucher wrote: > > > > On Mon, Jul 6, 2015 at 9:39 AM, Steven Newbury < > > > > steve@xxxxxxxxxxxxxxx > > > > > wrote: > > > > > Hi, > > > > > I've been trying to get DRM/KMS working with the current > > > > > graphics > > > > > stack (xf86-video-ati 7.5, xserver-1.17) on a R200 series > > > > > card. I > > > > > assumed this should be working since KMS was implemented for > > > > > it a > > > > > while back, and it has been working with xf86-video-ati-6.x. > > > > > > > > > > Unfortunately, it doesn't seem to work. > > > > > > > > > > I've narrowed it down to drmSetInterfaceVersion() failing when > > > > > called > > > > > from the ATI driver (in radeon_kms.c). This is a bit strange > > > > > since, > > > > > /sys/class/drm/version correctly reports 1.1.0 20060810. > > > > > Presuably > > > > > it's getting the correct fd for the DRM master otherwise it > > > > > should > > > > > bail earlier? > > > > > > > > > > > > > > > Googling confirms others have had the same issue, and > > > > > generally the > > > > > resolution has been to stick with the old driver. > > > > > > > > > > Should this be working? Is it known to be broken? > > > > > > > > It should be working. Make sure the kernel driver has kms > > > > enabled, > > > > firmware available, and that the kernel driver is loaded before > > > > starting X. If the kernel driver is not loaded before X starts > > > > you > > > > can get a version mis-match error. > > > > > > Yes, using Gentoos 4.1.1 kernel, driver is definitely loaded, with > > > modeset=1, which is working, all sysfs entries are there. gdm > > > manages > > > to fall back to starting up an X session without using DRM swrast > > > -only, not something you want to experience on such a weak CPU! > > > > > > > If the kernel driver loads properly and you get a kms console you > > should be good to go. > > > > > Manually starting X fails with the "[drm] failed to set drm > > > interface > > > version." error. > > > > > > > Maybe the ddx with that old system was build without KMS support? > Everything is freshly compiled. The error itself is coming from > radeon_kms.c:651 in the ddx. Do you have latest libdrm? We might have accidentally broken this for very old versions of libdrm (although surprising this would compile with everything else). -Daniel > > > > > Alex > > > > > It's a very old system, PCI-only(!) Coppermine-128, belonging to a > > > friend. The system previously was (very slowly) running Ubuntu 10 > > > LTS, I think. It's not my machine so I'm not able to have > > > continuous > > > access, but R200 DRM/KMS was working. Apparently, Ubuntu no longer > > > support R200, so no further updates were possible. > > > > > > My friend can't afford a new machine at the moment; and since I'm a > > > long time Gentoo dev I took it upon myself to build him a optimized > > > desktop with gcc-5, where possible LTO, -Os, -march=pentium3 with > > > the > > > system L1 and L2 cache size information. It's quite possible some > > > part of the gfx stack is miscompiled, I tested it pretty throughly > > > under qemu (with qxl) before deployment, but that of course didn't > > > exercise the R200 driver. FWIW, other than the failing DRI, > > > performance is surprisingly OK, not super fast obviously, but a > > > *lot* > > > better than under Ubuntu! (start-up time is alot quicker, by an > > > order > > > of magnitude!) > > > > > > I'm attempting to downgrade the xserver and drivers (on the live > > > system) to see if that works, you can imagine that takes a little > > > while on a Coppermine-128! I'll find out tomorrow. Otherwise, I > > > guess I'm recompiling the stack with gcc-4.9 and no-LTO... > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > http://lists.freedesktop.org/mailman/listinfo/dri-devel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
