Hi Philipp, Am Mittwoch, 11. März 2015, 10:28:29 schrieb Philipp Zabel: > Am Dienstag, den 10.03.2015, 22:45 +0100 schrieb Heiko Stuebner: > > At least the Rockchip variant of the dw_hdmi can have controllable power > > supplies providing 1.0 and 1.8V. Therefore add the possibility for the > > generic bridge driver to enable supplies provided by the hw-specific > > drivers. > > > > Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> > > --- > > changes since v1: > > - follow suggestion from Russell King to keep regulator handling local > > > > to the rockchip implementation for the time being and only generalize > > when a real second implementation needs regulator handling > > > > .../devicetree/bindings/drm/bridge/dw_hdmi.txt | 5 ++++ > > drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 32 > > +++++++++++++++++++++- 2 files changed, 36 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt > > b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt index > > a905c14..bb74640 100644 > > --- a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt > > +++ b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt > > @@ -22,6 +22,11 @@ Optional properties > > > > - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing > > - clocks, clock-names: phandle to the HDMI CEC clock, name should be > > "cec" > > > > +Optional supplies: > > +rockchip,rk3288-dw-hdmi handles two optional power supplies: > > +- avdd1v0-supply: 1.0V power supply > > +- avdd1v8-supply: 1.8V power supply > > Are these the names used in the Rockchip documentation? > > Since the older implementation on i.MX6 uses 1.1V (HDMI_VP) and 2.5V > (HDMI_VPH), I wonder whether each SoC should use their own name or > whether there should be common names that don't include the voltage. > I don't have the Synopsys HDMI TX docs, but I've seen avddhv and avddlv > used of other cores' analog supplies. The pins of the soc connected to the regulators are named: HDMI_AVDD_1V0 HDMI_AVDD_1V8 The datasheet only calls both "DC supply voltage for Analog part of HDMI" and never mentions them again. The databook of the IP block itself seems to really call this VPH and VP as phy supplies, but documentation is a bit sparse about them. I guess as we already use the databook clock-names I should also switch to the databook supply names (avdd1v0 -> vp and avdd1v8 -> vph). Heiko _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
