Hi Heiko, Am Dienstag, den 10.03.2015, 22:45 +0100 schrieb Heiko Stuebner: > At least the Rockchip variant of the dw_hdmi can have controllable power supplies > providing 1.0 and 1.8V. Therefore add the possibility for the generic bridge > driver to enable supplies provided by the hw-specific drivers. > > Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> > --- > changes since v1: > - follow suggestion from Russell King to keep regulator handling local > to the rockchip implementation for the time being and only generalize > when a real second implementation needs regulator handling > > .../devicetree/bindings/drm/bridge/dw_hdmi.txt | 5 ++++ > drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 32 +++++++++++++++++++++- > 2 files changed, 36 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt > index a905c14..bb74640 100644 > --- a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt > +++ b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt > @@ -22,6 +22,11 @@ Optional properties > - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing > - clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" > > +Optional supplies: > +rockchip,rk3288-dw-hdmi handles two optional power supplies: > +- avdd1v0-supply: 1.0V power supply > +- avdd1v8-supply: 1.8V power supply Are these the names used in the Rockchip documentation? Since the older implementation on i.MX6 uses 1.1V (HDMI_VP) and 2.5V (HDMI_VPH), I wonder whether each SoC should use their own name or whether there should be common names that don't include the voltage. I don't have the Synopsys HDMI TX docs, but I've seen avddhv and avddlv used of other cores' analog supplies. regards Philipp _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
