[PATCH v4 07/15] drm: bridge/dw_hdmi: set ncts_atomic_write & cts_manual

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>

The ncts_atomic_write & cts_manual bits are present when design id
equal to 0x20.

After setting ncts_atomic_write, new N and CTS values are only used when
aud_n1 register is updated.

After setting cts_manual, new CTS value can set by AUD_CTS registers.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v4:
- Combine N3 registers setting

Changes in v3:
- Set ncts_atomic_write & cts_manual

Changes in v2: None

 drivers/gpu/drm/bridge/dw_hdmi.c | 10 +++++++++-
 drivers/gpu/drm/bridge/dw_hdmi.h |  4 ++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 12d8b7e..001e5ab 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -199,8 +199,15 @@ static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg,
 static void hdmi_set_clock_regenerator(struct dw_hdmi *hdmi,
 				       unsigned int n, unsigned int cts)
 {
+	u8 n3 = 0;
 	u8 cts3 = 0;
 
+	/* First set NCTS_ATOMIC_WRITE (if present) */
+	if (hdmi->id.design == 0x20) {
+		n3 = HDMI_AUD_N3_NCTS_ATOMIC_WRITE;
+		hdmi_writeb(hdmi, n3, HDMI_AUD_N3);
+	}
+
 	/* set CTS_MANUAL (if present) */
 	if (hdmi->id.design == 0x20)
 		cts3 = HDMI_AUD_CTS3_CTS_MANUAL;
@@ -214,7 +221,8 @@ static void hdmi_set_clock_regenerator(struct dw_hdmi *hdmi,
 	hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1);
 
 	/* write N values; N1 must be written last */
-	hdmi_writeb(hdmi, (n >> 16) & 0xf, HDMI_AUD_N3);
+	n3 |= (n >> 16) & HDMI_AUD_N3_AUDN19_16_MASK;
+	hdmi_writeb(hdmi, n3, HDMI_AUD_N3);
 	hdmi_writeb(hdmi, (n >> 8) & 0xff, HDMI_AUD_N2);
 	hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
 }
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.h b/drivers/gpu/drm/bridge/dw_hdmi.h
index c7ac538..8e5ad50 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.h
+++ b/drivers/gpu/drm/bridge/dw_hdmi.h
@@ -907,6 +907,10 @@ enum {
 	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08,
 	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_MASK = 0x04,
 
+/* AUD_N3 field values */
+	HDMI_AUD_N3_NCTS_ATOMIC_WRITE = 0x80,
+	HDMI_AUD_N3_AUDN19_16_MASK = 0x0f,
+
 /* AUD_CTS3 field values */
 	HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5,
 	HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,
-- 
2.1.2


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux