Change 'mutliple' to 'multiple'
Change 'mutlipler' to 'multiplier'
Change 'Haswel' to 'Haswell'
Signed-off-by: Yannick Guerrini <yguerrini@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +-
drivers/gpu/drm/i915/i915_reg.h | 2 +-
drivers/gpu/drm/i915/intel_sdvo.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 85a6ada..213a261 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -1518,7 +1518,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
* - The batch is already pinned into the relevant ppgtt, so we
* already have the backing storage fully allocated.
* - No other BO uses the global gtt (well contexts, but meh),
- * so we don't really have issues with mutliple objects not
+ * so we don't really have issues with multiple objects not
* fitting due to fragmentation.
* So this is actually safe.
*/
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 55143cb..56b97c4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3019,7 +3019,7 @@ enum skl_disp_power_wells {
/* Video Data Island Packet control */
#define VIDEO_DIP_DATA 0x61178
-/* Read the description of VIDEO_DIP_DATA (before Haswel) or VIDEO_DIP_ECC
+/* Read the description of VIDEO_DIP_DATA (before Haswell) or VIDEO_DIP_ECC
* (Haswell and newer) to see which VIDEO_DIP_DATA byte corresponds to each byte
* of the infoframe structure specified by CEA-861. */
#define VIDEO_DIP_DATA_SIZE 32
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 64ad2b4..9e554c2 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1247,7 +1247,7 @@ static void intel_sdvo_pre_enable(struct intel_encoder *intel_encoder)
switch (crtc->config->pixel_multiplier) {
default:
- WARN(1, "unknown pixel mutlipler specified\n");
+ WARN(1, "unknown pixel multiplier specified\n");
case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
case 4: rate = SDVO_CLOCK_RATE_MULT_4X; break;
--
1.9.5.msysgit.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
