https://bugzilla.kernel.org/show_bug.cgi?id=91861 --- Comment #10 from Christian König <deathsimple@xxxxxxxxxxx> --- (In reply to Alex Deucher from comment #9) > (In reply to Mike S. from comment #8) > > Thanks for the explanation. > > > > Can I suggest that you delay committing this patch for a week or so - I want > > to check that it is really stable. Yesterday I had one incident where the > > screen froze with diagonal coloured stripes for a couple of seconds, which I > > have never seen before. It recovered itself OK without having to re-boot. > > Could this have been caused by the higher divider values? > > Probably not. Usually PLL problems manifest themselves as no signal or > periodic signal drop outs. Keep in mind that prior to kernel 3.15, the > driver used a different algorithm that had its own limitations. Yeah, agree. For PLLs you usually know in a few minutes if your setup works or not. The only thing that could affect it a bit is the temperature, but then you are driving the PLL so close to the edge that you will notice problems relatively soon as well. -- You are receiving this mail because: You are watching the assignee of the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
