On 10/31/2014 05:09 PM, Fabio Estevam wrote: > Hi Steve, > > On Fri, Oct 31, 2014 at 8:53 PM, Steve Longerbeam <slongerbeam@xxxxxxxxx> wrote: >> Hi, this affects only Freescale imx IPU and imx-drm staging drivers, >> except for two patches that affect drm core (patch 53 and 63, see below). >> >> New features for imx-drm staging driver: >> >> - Support for multi-display (HDMI and LVDS). >> - Support for global alpha and color-key properties for overlay plane. >> - Support for gamma correction. >> - The imx-drm crtc devices moved to device tree. >> - Support for defining custom display interface pixel mappings in the >> device tree. >> - Implements encoder DPMS for LVDS. >> - YUV planar pixel formats supported for DRM framebuffers. >> - DDC support added for LVDS. >> - Page flip handling moved to imx plane driver and implemented with >> IPU double-buffering. >> - Support page-flip in the overlay plane (patch 53 affects drm core). >> - Add support for parsing pixel clock edge select (patch 63 affects drm core). >> - Add LVDS connection detect via drm_probe_ddc(). >> - Implement crtc mode_set_base using plane page-flip. >> >> >> Fixed issues: >> >> - HDMI and LVDS now use different PLL clock roots (part of multi-display >> support). >> - Use counter added to IPU DC enable/disable (part of multi-display >> support). >> - Fixed some HDMI timing issues. >> - Wider range of supported DI pixel clocks generated (all EDID modes >> reported from HDMI displays now work). >> - Fix separate primary plane objects. >> - HDMI must select DI pre clock as DI clock parent during encoder prepare >> (LVDS may have switched DI clock to LDB parent, part of multi-display >> support). >> - Assign correct DMFC burst size. >> - Resolve some DI synchronous display error cases. >> >> >> >> George G. Davis (1): >> ARM: dts: imx6qdl-sabreauto: Add HDMI device >> >> Jiada Wang (1): >> gpu: ipu-v3: fix HDMI timing issues >> >> Steve Longerbeam (70): >> ARM: dts: imx6qdl-sabrelite: Add HDMI device >> ARM: dts: imx6qdl: Create imx-drm crtc nodes >> ARM: i.MX6: use pll2_pfd0_352m as clock root of ipu_di >> ARM: i.MX6: select pll3_usb_otg for ldb_di for rev 1.0 chip >> gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset() >> gpu: ipu-v3: Add ipu_dp_set_chroma_key() >> gpu: ipu-v3: Add ipu_dp_set_gamma_correction() >> gpu: ipu-v3: Add support for dynamic DC interface pixel maps >> gpu: ipu-v3: Add ipu_dc_uninit_sync() >> gpu: ipu-v3: Pass struct ipu_dc to enable/disable >> gpu: ipu-v3: Add ipu_dp_uninit_channel() >> gpu: ipu-v3: Pass struct ipu_dp to enable/disable >> gpu: ipu-v3: Implement use counter for ipu_dc_enable(), >> ipu_dc_disable() >> gpu: ipu-v3: Add DMFC/DP/DC/DI module enable/disable debug >> gpu: ipu-v3: Add ipu_di_uninit_sync_panel() >> gpu: ipu-v3: Split out DI clock enable/disable >> gpu: ipu-v3: Protect more CM reg access with IPU lock >> gpu: ipu-v3: Move DI waveform counter enable/disable to ipu-di >> gpu: ipu-v3: Update DP sync SRM always in ipu_dp_enable_channel() >> gpu: ipu-v3: Fix indent/ws in ipu-dmfc >> gpu: ipu-v3: Allow burstsize of 20 in ipu_dmfc_setup_channel() >> gpu: ipu-v3: Remove ipu_dmfc_init_channel() >> gpu: ipu-v3: Consolidate mutex lock in ipu_dmfc_alloc_bandwidth() >> gpu: ipu-v3: Enumerate the DC channel names >> gpu: ipu-di: Move ipu pointer init >> gpu: ipu-di: Add and improve debug/error messages >> gpu: ipu-v3: Change signal names in struct ipu_di_signal_cfg >> gpu: ipu-v3: Remove IPU client registration >> gpu: ipu-di: Set rate of DI pre clock >> gpu: ipu-v3: Add RGB666 interface pixel map >> gpu: ipu-cpmem: Pass drm fourcc to ipu_cpmem_set_yuv_* >> gpu: ipu-v3: Add ipu_drm_fourcc_is_planar() >> gpu: ipu-v3: Add IDMA channel linking support >> gpu: ipu-cpmem: Support YVU422 >> gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize() >> imx-drm: Crtcs moved to device tree >> imx-drm: hdmi: optimize i2c write wait >> imx-drm: parallel-display: Support RGB666 pixel fmt >> imx-drm: imx-ldb: Add debug to connector/encoder entry points >> imx-drm: imx-ldb: Implement imx_ldb_encoder_dpms() >> imx-drm: parallel-display: Fix typo when setting mode type >> imx-drm: ipuv3-plane: Fix planar formats >> imx-drm: ipuv3-plane: Allow YUV space for background plane >> imx-drm: ipuv3-plane: Add more supported pixel formats >> imx-drm: ipuv3-plane: Implement global alpha and colorkey properties >> imx-drm: hdmi: rework irq request/free >> imx-drm: imx-ldb: Add DDC support >> imx-drm: Fix separate primary plane objects >> imx-drm: Move page flip handling to plane driver >> imx-drm: Reset ipu unit pointers to NULL on errors >> drm: implement page flipping support for planes >> imx-drm: ipuv3-plane: Assign page_flip method to drm_plane_funcs >> imx-drm: Implement DRM gamma set >> imx-drm: Implement custom ioctl to set gamma >> imx-drm: Add support for interface pixel maps >> imx-drm: parallel-display: Add interface-pix-map DT property >> imx-drm: hdmi: set DI clock source to DI pre clock >> imx-drm: ipuv3-crtc: Set the crtc device name >> imx-drm: hdmi: Save ipu/di mux for later iomux setup >> imx-drm: ipuv3-plane: Assign correct dmfc burst size >> drm_modes: videomode: add pos/neg pixel clock polarity flag >> imx-drm: ipuv3-crtc: Use DRM mode flags to configure pixel clock >> polarity >> imx-drm: imx-ldb: Add all defined of video modes >> imx-drm: parallel-display: Add all defined of video modes >> imx-drm: ipuv3-crtc: Disable fb on crtc unbind >> imx-drm: imx-ldb: Use DDC probe as connection detect >> imx-drm: ipuv3-crtc: Implement mode_set_base >> imx-drm: Cancel pending page flip events at preclose >> imx-drm: ipuv3-crtc: Disable overlay plane during crtc disable >> imx-drm: ipuv3-plane: Enable 8 burst locking > Cool stuff! > > Would you have a git tree we can use for test these? Hi Fabio, Yes I forgot to mention that in the cover letter: git@xxxxxxxxxx:slongerbeam/drm-next.git Branch is imx-drm-mentor. Steve _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
