Hi Steve, On Fri, Oct 31, 2014 at 8:53 PM, Steve Longerbeam <slongerbeam@xxxxxxxxx> wrote: > Hi, this affects only Freescale imx IPU and imx-drm staging drivers, > except for two patches that affect drm core (patch 53 and 63, see below). > > New features for imx-drm staging driver: > > - Support for multi-display (HDMI and LVDS). > - Support for global alpha and color-key properties for overlay plane. > - Support for gamma correction. > - The imx-drm crtc devices moved to device tree. > - Support for defining custom display interface pixel mappings in the > device tree. > - Implements encoder DPMS for LVDS. > - YUV planar pixel formats supported for DRM framebuffers. > - DDC support added for LVDS. > - Page flip handling moved to imx plane driver and implemented with > IPU double-buffering. > - Support page-flip in the overlay plane (patch 53 affects drm core). > - Add support for parsing pixel clock edge select (patch 63 affects drm core). > - Add LVDS connection detect via drm_probe_ddc(). > - Implement crtc mode_set_base using plane page-flip. > > > Fixed issues: > > - HDMI and LVDS now use different PLL clock roots (part of multi-display > support). > - Use counter added to IPU DC enable/disable (part of multi-display > support). > - Fixed some HDMI timing issues. > - Wider range of supported DI pixel clocks generated (all EDID modes > reported from HDMI displays now work). > - Fix separate primary plane objects. > - HDMI must select DI pre clock as DI clock parent during encoder prepare > (LVDS may have switched DI clock to LDB parent, part of multi-display > support). > - Assign correct DMFC burst size. > - Resolve some DI synchronous display error cases. > > > > George G. Davis (1): > ARM: dts: imx6qdl-sabreauto: Add HDMI device > > Jiada Wang (1): > gpu: ipu-v3: fix HDMI timing issues > > Steve Longerbeam (70): > ARM: dts: imx6qdl-sabrelite: Add HDMI device > ARM: dts: imx6qdl: Create imx-drm crtc nodes > ARM: i.MX6: use pll2_pfd0_352m as clock root of ipu_di > ARM: i.MX6: select pll3_usb_otg for ldb_di for rev 1.0 chip > gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset() > gpu: ipu-v3: Add ipu_dp_set_chroma_key() > gpu: ipu-v3: Add ipu_dp_set_gamma_correction() > gpu: ipu-v3: Add support for dynamic DC interface pixel maps > gpu: ipu-v3: Add ipu_dc_uninit_sync() > gpu: ipu-v3: Pass struct ipu_dc to enable/disable > gpu: ipu-v3: Add ipu_dp_uninit_channel() > gpu: ipu-v3: Pass struct ipu_dp to enable/disable > gpu: ipu-v3: Implement use counter for ipu_dc_enable(), > ipu_dc_disable() > gpu: ipu-v3: Add DMFC/DP/DC/DI module enable/disable debug > gpu: ipu-v3: Add ipu_di_uninit_sync_panel() > gpu: ipu-v3: Split out DI clock enable/disable > gpu: ipu-v3: Protect more CM reg access with IPU lock > gpu: ipu-v3: Move DI waveform counter enable/disable to ipu-di > gpu: ipu-v3: Update DP sync SRM always in ipu_dp_enable_channel() > gpu: ipu-v3: Fix indent/ws in ipu-dmfc > gpu: ipu-v3: Allow burstsize of 20 in ipu_dmfc_setup_channel() > gpu: ipu-v3: Remove ipu_dmfc_init_channel() > gpu: ipu-v3: Consolidate mutex lock in ipu_dmfc_alloc_bandwidth() > gpu: ipu-v3: Enumerate the DC channel names > gpu: ipu-di: Move ipu pointer init > gpu: ipu-di: Add and improve debug/error messages > gpu: ipu-v3: Change signal names in struct ipu_di_signal_cfg > gpu: ipu-v3: Remove IPU client registration > gpu: ipu-di: Set rate of DI pre clock > gpu: ipu-v3: Add RGB666 interface pixel map > gpu: ipu-cpmem: Pass drm fourcc to ipu_cpmem_set_yuv_* > gpu: ipu-v3: Add ipu_drm_fourcc_is_planar() > gpu: ipu-v3: Add IDMA channel linking support > gpu: ipu-cpmem: Support YVU422 > gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize() > imx-drm: Crtcs moved to device tree > imx-drm: hdmi: optimize i2c write wait > imx-drm: parallel-display: Support RGB666 pixel fmt > imx-drm: imx-ldb: Add debug to connector/encoder entry points > imx-drm: imx-ldb: Implement imx_ldb_encoder_dpms() > imx-drm: parallel-display: Fix typo when setting mode type > imx-drm: ipuv3-plane: Fix planar formats > imx-drm: ipuv3-plane: Allow YUV space for background plane > imx-drm: ipuv3-plane: Add more supported pixel formats > imx-drm: ipuv3-plane: Implement global alpha and colorkey properties > imx-drm: hdmi: rework irq request/free > imx-drm: imx-ldb: Add DDC support > imx-drm: Fix separate primary plane objects > imx-drm: Move page flip handling to plane driver > imx-drm: Reset ipu unit pointers to NULL on errors > drm: implement page flipping support for planes > imx-drm: ipuv3-plane: Assign page_flip method to drm_plane_funcs > imx-drm: Implement DRM gamma set > imx-drm: Implement custom ioctl to set gamma > imx-drm: Add support for interface pixel maps > imx-drm: parallel-display: Add interface-pix-map DT property > imx-drm: hdmi: set DI clock source to DI pre clock > imx-drm: ipuv3-crtc: Set the crtc device name > imx-drm: hdmi: Save ipu/di mux for later iomux setup > imx-drm: ipuv3-plane: Assign correct dmfc burst size > drm_modes: videomode: add pos/neg pixel clock polarity flag > imx-drm: ipuv3-crtc: Use DRM mode flags to configure pixel clock > polarity > imx-drm: imx-ldb: Add all defined of video modes > imx-drm: parallel-display: Add all defined of video modes > imx-drm: ipuv3-crtc: Disable fb on crtc unbind > imx-drm: imx-ldb: Use DDC probe as connection detect > imx-drm: ipuv3-crtc: Implement mode_set_base > imx-drm: Cancel pending page flip events at preclose > imx-drm: ipuv3-crtc: Disable overlay plane during crtc disable > imx-drm: ipuv3-plane: Enable 8 burst locking Cool stuff! Would you have a git tree we can use for test these? Thanks _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
