[PATCH] drm/radeon/dpm: set the thermal type properly for special configs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On systems with special thermal configurations make sure we make
note of the thermal setup.  This is required for proper firmware
configuration on these systems.

Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/gpu/drm/radeon/radeon_atombios.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 92b2d8d..3027e9b 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2281,19 +2281,31 @@ static void radeon_atombios_add_pplib_thermal_controller(struct radeon_device *r
 				 (controller->ucFanParameters &
 				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
 			rdev->pm.int_thermal_type = THERMAL_TYPE_KV;
-		} else if ((controller->ucType ==
-			    ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO) ||
-			   (controller->ucType ==
-			    ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL) ||
-			   (controller->ucType ==
-			    ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL)) {
-			DRM_INFO("Special thermal controller config\n");
+		} else if (controller->ucType ==
+			   ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO) {
+			DRM_INFO("External GPIO thermal controller %s fan control\n",
+				 (controller->ucFanParameters &
+				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+			rdev->pm.int_thermal_type = THERMAL_TYPE_EXTERNAL_GPIO;
+		} else if (controller->ucType ==
+			   ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL) {
+			DRM_INFO("ADT7473 with internal thermal controller %s fan control\n",
+				 (controller->ucFanParameters &
+				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+			rdev->pm.int_thermal_type = THERMAL_TYPE_ADT7473_WITH_INTERNAL;
+		} else if (controller->ucType ==
+			   ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL) {
+			DRM_INFO("EMC2103 with internal thermal controller %s fan control\n",
+				 (controller->ucFanParameters &
+				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+			rdev->pm.int_thermal_type = THERMAL_TYPE_EMC2103_WITH_INTERNAL;
 		} else if (controller->ucType < ARRAY_SIZE(pp_lib_thermal_controller_names)) {
 			DRM_INFO("Possible %s thermal controller at 0x%02x %s fan control\n",
 				 pp_lib_thermal_controller_names[controller->ucType],
 				 controller->ucI2cAddress >> 1,
 				 (controller->ucFanParameters &
 				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+			rdev->pm.int_thermal_type = THERMAL_TYPE_EXTERNAL;
 			i2c_bus = radeon_lookup_i2c_gpio(rdev, controller->ucI2cLine);
 			rdev->pm.i2c_bus = radeon_i2c_lookup(rdev, &i2c_bus);
 			if (rdev->pm.i2c_bus) {
-- 
1.8.3.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux