Re: [RFC] drm/msm: DT support for 8960/8064

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 02, 2014 at 10:01:40PM +0100, Rob Clark wrote:
> On Wed, Jul 2, 2014 at 2:09 PM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> > On Tue, Jul 01, 2014 at 07:57:35PM +0100, Rob Clark wrote:
> >> Now that we (almost) have enough dependencies in place (MMCC, RPM, etc),
> >> add necessary DT support so that we can use drm/msm on upstream kernel.
> >>
> >> Signed-off-by: Rob Clark <robdclark@xxxxxxxxx>
> >> ---
> >> Commence bikeshedding :-)
> >>
> >>  Documentation/devicetree/bindings/drm/msm/gpu.txt  | 51 ++++++++++++++++++++
> >>  Documentation/devicetree/bindings/drm/msm/hdmi.txt | 43 +++++++++++++++++
> >>  Documentation/devicetree/bindings/drm/msm/msm.txt  | 40 ++++++++++++++++
> >>  drivers/gpu/drm/msm/adreno/a3xx_gpu.c              |  2 +
> >>  drivers/gpu/drm/msm/hdmi/hdmi.c                    | 55 ++++++++++++++--------
> >>  drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c            | 10 ++--
> >>  drivers/gpu/drm/msm/msm_drv.c                      | 29 ++++++++++--
> >>  7 files changed, 204 insertions(+), 26 deletions(-)
> >>  create mode 100644 Documentation/devicetree/bindings/drm/msm/gpu.txt
> >>  create mode 100644 Documentation/devicetree/bindings/drm/msm/hdmi.txt
> >>  create mode 100644 Documentation/devicetree/bindings/drm/msm/msm.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/drm/msm/gpu.txt b/Documentation/devicetree/bindings/drm/msm/gpu.txt
> >> new file mode 100644
> >> index 0000000..6e33efe
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/drm/msm/gpu.txt
> >> @@ -0,0 +1,51 @@
> >> +Qualcomm adreno/snapdragon GPU
> >> +
> >> +Required properties:
> >> +- compatible: "qcom,adreno-3xx"
> >
> > As Olof said, choose a definite name here, and have variants claim
> > compatibility with that in addition to a variant specific string.
> >
> >> +- reg: Physical base address and length of the controller's registers.
> >
> > Just the one reg entry?
> 
> as far as I know.. keep in mind, I'm working without docs

Sure. If we only know about one reg entrty that's fine.

> 
> > The example has reg-names. Either document the name or drop it.
> >
> >> +- interrupts: The interrupt outputs from the controller.
> >
> > How many? Which ones? Names?
> >
> >> +- clocks: device clocks
> >> +  See ../clocks/clock-bindings.txt for details.
> >
> > Similarly?
> >
> > I should be able to read the binding and put together a DTS. Currently I
> > cannot.
> >
> >> +- qcom,chipid: gpu chip-id.  Note this may become optional for future
> >> +  devices if we can reliably read the chipid from hw
> >
> > What's the problem with reading chipid from HW at the moment?
> >
> > Should this possibly be optional, and only if not possible to read from
> > HW?
> 
> As far as I can tell from diving downstream android kgsl code, seems
> like some a2xx you might be able to read the value from hw.  Beyond
> that I'm not entirely sure.  (Remember, no docs.)
> 
> I'm leaving it as-is and if someone who has docs wants to submit patch
> to change it, that is fine.

My concern is that the statement "this may become optional" is useless,
as it doesn't tell you what expected if it's not present.

I would reword this as:

- qcom,chip-id: The gpu chip-id, if the hardware value is not reliable.

And then read from the HW if it's not present.

> >> +- qcom,gpu-pwrlevels: array of OPPs, sorted highest to lowest
> >
> > This is confusing. This is a node rather than a property, and in general
> > it's not a good idea to rely on node ordering (there's no such thing as
> > an array of nodes in the DTB).
> >
> >> +  - compatible: "qcom,gpu-pwrlevels"
> >> +  - for each qcom,gpu-pwrlevel:
> >
> > Is that a compatible string for each node, name, or what?
> >
> > Any reason for having this as a container node at all?
> 
> some of the decisions are made to make it easier to re-use/support
> existing bindings in downstream kernel..

I don't see why we should be beholden to downstream kernel bindings.

> 
> >> +    - qcom,gpu-freq: requested gpu clock speed
> >> +    - NOTE: downstream android driver defines additional parameters to
> >> +      configure memory bandwidth scaling per OPP.
> >
> > So? Either define those or don't bother. Having a halfway house binding
> > is not helpful.
> 
> I'm not really in a position to document them at this point, sorry.

Then drop it.

> >> +
> >> +Optional properties:
> >> +- n/a
> >
> > Drop this if there are no optional properties.
> >
> >> +
> >> +Example:
> >> +
> >> +/ {
> >> +       ...
> >> +
> >> +       gpu: qcom,kgsl-3d0@4300000 {
> >> +               compatible = "qcom,adreno-3xx";
> >> +               reg = <0x04300000 0x20000>;
> >> +               reg-names = "kgsl_3d0_reg_memory";
> >> +               interrupts = <GIC_SPI 80 0>;
> >> +               interrupt-names = "kgsl_3d0_irq";
> >> +               clock-names =
> >> +                   "core_clk",
> >> +                   "iface_clk",
> >> +                   "mem_iface_clk";
> >> +               clocks =
> >> +                   <&mmcc GFX3D_CLK>,
> >> +                   <&mmcc GFX3D_AHB_CLK>,
> >> +                   <&mmcc MMSS_IMEM_AHB_CLK>;
> >> +               qcom,chipid = <0x03020100>;
> >> +               qcom,gpu-pwrlevels {
> >> +                       compatible = "qcom,gpu-pwrlevels";
> >> +                       qcom,gpu-pwrlevel@0 {
> >> +                               qcom,gpu-freq = <450000000>;
> >> +                       };
> >> +                       qcom,gpu-pwrlevel@1 {
> >> +                               qcom,gpu-freq = <27000000>;
> >> +                       };
> >> +               };
> >> +       };
> >> +};
> >> diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
> >> new file mode 100644
> >> index 0000000..051a49f
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
> >> @@ -0,0 +1,43 @@
> >> +Qualcomm adreno/snapdragon hdmi output
> >> +
> >> +Required properties:
> >> +- compatible: "qcom,hdmi-tx-8x60", "qcom,hdmi-tx-8960", "qcom,hdmi-tx-8x74"
> >
> > Please don't use wildcard strings.
> >
> > Is a node expected to have one of these entries, or all?
> 
> not quite sure what you mean.. Yes a node is expected to have
> 'compatible'.  Which should have one of those values (with potentially
> more values added later)

Sorry for the lack of clarity. I meant is it expected that I should
have:

compatible = "qcom,hdmi-tx-8x60", "qcom,hdmi-tx-8960",
	     "qcom,hdmi-tx-8x74";

Or just a single string for a given device?

I assume the latter.

> 
> > I would recommend using a bulleted list to describe compatible strings.
> > It allows for easier extension and the easy addition of notes. e.g.
> >
> > - compatible: should contain:
> >   * "foo,bar-xtreme" for bar variants with the xtreme extensions.
> >   * "foo,bar" for all bar variants (inc. xtreme).
> >   * "foo,baz" for baz variants.
> >   * "foo,foo" for all variants.
> 
> sure
> 
> >> +- reg: Physical base address and length of the controller's registers.
> >> +- interrupts: The interrupt outputs from the controller.
> >> +- clocks: device clocks
> >
> > One entry? Multiple?
> >
> > What do they correspond to on the data sheet?
> 
> get someone to send me a data sheet.  I'd love to tell you then ;-)

Sure :)

> > Names?
> >
> >> +  See ../clocks/clock-bindings.txt for details.
> >> +- qcom,hdmi-tx-ddc-clk: ddc clk pin
> >> +- qcom,hdmi-tx-ddc-data: ddc data pin
> >> +- qcom,hdmi-tx-hpd: hpd pin
> >
> > GPIOs should be called *-gpios.
> 
> again just trying to be compatible with some existing downstream DT..

And again I'm not certain that's a good idea...

> >> +- core-vdda-supply: phandle to supply regulator
> >> +- hdmi-mux-supply: phandle to mux regulator
> >> +
> >> +Optional properties:
> >> +- qcom,hdmi-tx-mux-en: hdmi mux enable pin
> >> +- qcom,hdmi-tx-mux-sel: hdmi mux select pin
> >
> > GPIOs again.
> >
> >> +
> >> +Example:
> >> +
> >> +/ {
> >> +       ...
> >> +
> >> +       hdmi: qcom,hdmi-tx-8960@4a00000 {
> >> +               compatible = "qcom,hdmi-tx-8960";
> >> +               reg-names = "core_physical";
> >> +               reg = <0x04a00000 0x1000>;
> >> +               interrupts = <GIC_SPI 79 0>;
> >> +               clock-names =
> >> +                   "core_clk",
> >> +                   "master_iface_clk",
> >> +                   "slave_iface_clk";
> >> +               clocks =
> >> +                   <&mmcc HDMI_APP_CLK>,
> >> +                   <&mmcc HDMI_M_AHB_CLK>,
> >> +                   <&mmcc HDMI_S_AHB_CLK>;
> >> +               qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
> >> +               qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
> >> +               qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
> >> +               core-vdda-supply = <&pm8921_hdmi_mvs>;
> >> +               hdmi-mux-supply = <&ext_3p3v>;
> >> +       };
> >> +};
> >> diff --git a/Documentation/devicetree/bindings/drm/msm/msm.txt b/Documentation/devicetree/bindings/drm/msm/msm.txt
> >> new file mode 100644
> >> index 0000000..484cc12
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/drm/msm/msm.txt
> >> @@ -0,0 +1,40 @@
> >> +Qualcomm adreno/snapdragon
> >
> > What exactly is this unit? Judging by the GPU phandle it's not the GPU
> > itself.
> 
> the display

I see. Could that be mentioned in the heading line above?

> 
> >> +
> >> +Required properties:
> >> +- compatible: "qcom,mdp" (mdp4) or "qcom,mdss_mdp" (mdp5)
> >> +- reg: Physical base address and length of the controller's registers.
> >> +- interrupts: The interrupt outputs from the controller.
> >
> > All of my prior points for these properties stand.
> >
> >> +- connectors: array of phandles for output device(s)
> >
> > What are valid devices to point this at?
> >
> >> +- clocks: device clocks
> >
> > Likewise, see my above points regarding clocks.
> >
> >> +  See ../clocks/clock-bindings.txt for details.
> >> +
> >> +Optional properties:
> >> +- gpus: phandle for gpu device
> >
> > What exactly is this used for?
> 
> 'gpus' and 'connectors' is basically part of the componentized device
> support.  It is how the master/toplevel drm device knows what
> sub-devices exist.
> 
> Currently there is just one valid possibility for each, but as we add
> DSI, DP, etc, and support for various other generations there will
> hopefully be more.  (For example, some older snapdragons had one 3d
> core and zero to two 2d cores.)

Ok. I must admit to being unfamiliar with how that's expected to work.

Thanks,
Mark.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux