Hi Tim, On Tue, Jun 10, 2014 at 3:54 PM, Tim Harvey <tharvey@xxxxxxxxxxxxx> wrote: > Fabio, > > I'm following along with this thread as I see the same thing you do on > our Ventana boards that support both LVDS and HDMI: without > hot-plugging the HDMI connector I get not HDMI out simply by having > the LVDS node populated. > > I am curious however how you are getting simultaneous display on both > LVDS and HDMI on a SabreSD board as the standard resistor loading > would make the EDID's of both conflict (which causes EDID read > failures) - perhaps you are using an LVDS display with no EDID or Yes, there is no EDID in the LVDS I am using. imxqdl-sabresd.dtsi declares the LVDS resolution to be 1024x768 and it never changes. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
