Russell, On Fri, Jun 6, 2014 at 10:56 AM, Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> wrote: > The initial state at boot is assumed to be disconnected, and we hope > to receive an interrupt to update the status. Let's be more explicit > about the current state - reading the PHY status register tells us > the current level of the hotplug signal, which we can report back in > the _detect() method. > > Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> I have applied this patch against 3.15 and I still have the following issue on a mx6qsabresd: If I boot the kernel with the HDMI cable connected, no HDMI image comes up. In order to get HDMI working I need to remove and then reconnect the cable. Still haven't had a chance to debug this though. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
