On Mon, May 12, 2014 at 1:42 PM, Rafał Miłecki <zajec5@xxxxxxxxx> wrote: > On 12 May 2014 17:57, Alex Deucher <alexdeucher@xxxxxxxxx> wrote: >> On Mon, May 12, 2014 at 9:54 AM, Rafał Miłecki <zajec5@xxxxxxxxx> wrote: >>> DCE 3.1 and 3.2 have different HDMI registers and should be programmed >>> in a slightly different way. Moving support to separated file will >>> allow use to use rv770d.h header in the future and adjust code as well. >> >> Any reason not to split it at DCE3.2 rather than 3.1? It seems like >> most (all?) of the changes are DCE3.2 specific rather than DCE3.1. >> Otherwise, seems fine to me. > > I believe DCE 3.1 has HDMI much more like DCE 3.2 and it's programmed > in a very similar way. Also it has 3.2 regs like DESCRIPTORs. The > biggest difference is that DCE 3.1 doesn't seem to have > AFMT_AUDIO_PACKET_CONTROL and AFMT_INFOFRAME_CONTROL0. > > Take a look at defines for DCE 3.2. Even they are placed in rv770d.h, > which is the DCE 3.1 chipset. Well, they were placed in there since rv770d.h was used by all r7xx asics which is a mix of DCE3.1 and 3.2. As far as I recall, 3.1 is pretty much the same as 3.0 from a programming perspective, but it's been a while since I looked at it in detail. The current hdmi code doesn't seem to have any DCE3.1 specific code at the moment. Alex _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
