On Thu, Apr 24, 2014 at 3:07 PM, Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> wrote: > On Thu, Apr 24, 2014 at 02:00:49PM -0700, Tim Harvey wrote: >> I'm still seeing issues with HDMI detect on powerup, at least on my >> Gateworks Ventana boards (which have no voltage devider or anything >> else on the HPD line to the IMX6 other than a TVS). I'm currently >> using your latest imx-drm-staging branch and have applied this patch >> on top of it. When I enable debug in imx-hdmi.c I see the following: > > So it's a similar setup to the Cubox-i. > <snip> > > which is only with imx-hdmi bound, no ldb. The difference you will > notice is that there's the "Console: switching ..." line, which is > there because I have fbcon enabled. > > Therefore, I suspect that it is working as it should - if you enable > fbcon, it should automatically initialise. If you don't have fbcon > enabled, then it'll probably wait for a userspace DRM driver to bring > it up. > Russell, Yes, your correct. If I enable fbcon it comes up at boot. But what if I don't want fbcon? I have CONFIG_LOGO=y and I would expect that to come up without needing to hotswap. Something must still be missing that is getting taken care of by fbcon. Thanks, Tim _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
