On Thu, Apr 24, 2014 at 02:00:49PM -0700, Tim Harvey wrote: > I'm still seeing issues with HDMI detect on powerup, at least on my > Gateworks Ventana boards (which have no voltage devider or anything > else on the HPD line to the IMX6 other than a TVS). I'm currently > using your latest imx-drm-staging branch and have applied this patch > on top of it. When I enable debug in imx-hdmi.c I see the following: So it's a similar setup to the Cubox-i. > on powerup with HDMI attached: > [ 6.291082] imx-ipuv3 2400000.ipu: IPUv3H probed > [ 6.298370] imx-ipuv3 2800000.ipu: IPUv3H probed > [ 6.310356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 6.317087] [drm] No driver support for vblank timestamp query. > [ 6.324249] imx-drm display-subsystem.11: bound imx-ipuv3-crtc.0 > (ops ipu_crtc_ops) > [ 6.332475] imx-drm display-subsystem.11: bound imx-ipuv3-crtc.1 > (ops ipu_crtc_ops) > [ 6.340616] imx-drm display-subsystem.11: bound imx-ipuv3-crtc.2 > (ops ipu_crtc_ops) > [ 6.349221] imx-drm display-subsystem.11: bound imx-ipuv3-crtc.3 > (ops ipu_crtc_ops) > [ 6.358098] imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1 > [ 6.365366] hdmi_compute_cts: freq: 48000 pixel_clk: 74250000 ratio: 100 > [ 6.372169] imx-hdmi 120000.hdmi: hdmi_set_clk_regenerator: > samplerate=48000 ratio=100 pixelclk=74250000 N=6144 cts=74250 > [ 6.383971] imx-drm display-subsystem.11: bound 120000.hdmi (ops hdmi_ops) > [ 6.383998] imx-hdmi 120000.hdmi: EVENT=plugin > [ 6.384011] imx-hdmi 120000.hdmi: imx_hdmi_poweron > [ 6.384022] imx-hdmi 120000.hdmi: imx_hdmi_setup vic=0 > [ 6.384031] imx-hdmi 120000.hdmi: Non-CEA mode used in HDMI > [ 6.384038] imx-hdmi 120000.hdmi: final pixclk = 0 > [ 6.402148] imx-hdmi 120000.hdmi: imx_hdmi_setup DVI mode > [ 6.428804] imx-drm display-subsystem.11: bound ldb.10 (ops imx_ldb_ops) > [ 6.490101] imx-hdmi 120000.hdmi: got edid: width[70] x height[39] > [ 6.506191] imx-drm display-subsystem.11: fb0: frame buffer device > [ 6.512596] imx-drm display-subsystem.11: registered panic notifier > [ 6.518947] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 So at boot, I see this: [ 1.282549] imx-ipuv3 2400000.ipu: IPUv3H probed [ 1.295494] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.302197] [drm] No driver support for vblank timestamp query. [ 1.308315] imx-drm display-subsystem.10: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops) [ 1.326728] imx-drm display-subsystem.10: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops) [ 1.336741] imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 [ 1.346109] hdmi_compute_cts: freq: 48000 pixel_clk: 74250000 ratio: 100 [ 1.346128] imx-hdmi 120000.hdmi: hdmi_set_clk_regenerator: samplerate=48000 ratio=100 pixelclk=74250000 N=6144 cts=74250 [ 1.346276] imx-hdmi 120000.hdmi: EVENT=plugin [ 1.346291] imx-hdmi 120000.hdmi: Non-CEA mode used in HDMI [ 1.346301] imx-hdmi 120000.hdmi: final pixclk = 0 [ 1.364422] imx-hdmi 120000.hdmi: imx_hdmi_setup DVI mode [ 1.365896] imx-drm display-subsystem.10: bound 120000.hdmi (ops hdmi_ops) [ 1.428629] imx-hdmi 120000.hdmi: got edid: width[128] x height[72] [ 1.435752] imx-hdmi 120000.hdmi: CEA mode used vic=31 [ 1.435761] imx-hdmi 120000.hdmi: final pixclk = 148500000 [ 1.453879] imx-hdmi 120000.hdmi: imx_hdmi_setup CEA mode [ 1.453886] hdmi_compute_cts: freq: 48000 pixel_clk: 148500000 ratio: 100 [ 1.453896] imx-hdmi 120000.hdmi: hdmi_set_clk_regenerator: samplerate=48000 ratio=100 pixelclk=148500000 N=6144 cts=148500 [ 1.454549] imx-hdmi 120000.hdmi: CEA mode used vic=31 [ 1.454555] imx-hdmi 120000.hdmi: final pixclk = 148500000 [ 1.472685] imx-hdmi 120000.hdmi: imx_hdmi_setup CEA mode [ 1.472691] hdmi_compute_cts: freq: 48000 pixel_clk: 148500000 ratio: 100 [ 1.472702] imx-hdmi 120000.hdmi: hdmi_set_clk_regenerator: samplerate=48000 ratio=100 pixelclk=148500000 N=6144 cts=148500 [ 1.489418] Console: switching to colour frame buffer device 240x67 [ 1.511370] imx-drm display-subsystem.10: fb0: frame buffer device [ 1.517770] imx-drm display-subsystem.10: registered panic notifier [ 1.524160] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 which is only with imx-hdmi bound, no ldb. The difference you will notice is that there's the "Console: switching ..." line, which is there because I have fbcon enabled. Therefore, I suspect that it is working as it should - if you enable fbcon, it should automatically initialise. If you don't have fbcon enabled, then it'll probably wait for a userspace DRM driver to bring it up. -- FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly improving, and getting towards what was expected from it. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
