On Tue, 17 Dec 2013, Thierry Reding <thierry.reding@xxxxxxxxx> wrote:
> This is a superset of the current i2c_dp_aux bus functionality and can
> be used to transfer native AUX in addition to I2C-over-AUX messages.
>
> Helpers are provided to read and write the DPCD, either blockwise or
> byte-wise. Many of the existing helpers for DisplayPort take a copy of a
> portion of the DPCD and operate on that, without a way to write data
> back to the DPCD (e.g. for configuration of the link).
>
> Subsequent patches will build upon this infrastructure to provide common
> functionality in a generic way.
>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 116 ++++++++++++++++++++++++++++++++++++++++
> include/drm/drm_dp_helper.h | 64 ++++++++++++++++++++++
> 2 files changed, 180 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 9e978aae8972..bd622d462ca7 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -346,3 +346,119 @@ int drm_dp_bw_code_to_link_rate(u8 link_bw)
> }
> }
> EXPORT_SYMBOL(drm_dp_bw_code_to_link_rate);
> +
> +/**
> + * drm_dp_dpcd_read() - read a series of bytes from the DPCD
> + * @aux: DisplayPort AUX channel
> + * @offset: address of the (first) register to read
> + * @buffer: buffer to store the register values
> + * @size: number of bytes in @buffer
> + *
> + * Returns the number of bytes transferred on success, or a negative error
> + * code on failure.
> + */
> +ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
> + void *buffer, size_t size)
> +{
> + struct drm_dp_aux_msg msg;
> + unsigned int retry;
> + int err;
> +
> + memset(&msg, 0, sizeof(msg));
> + msg.address = offset;
> + msg.request = DP_AUX_NATIVE_READ;
> + msg.buffer = buffer;
> + msg.size = size;
> +
> + /*
> + * The specification doesn't give any recommendation on how often to
> + * retry native transactions, so retry 7 times like for I2C-over-AUX
> + * transactions.
> + */
> + for (retry = 0; retry < 7; retry++) {
> + err = aux->transfer(aux, &msg);
> + if (err < 0) {
> + if (err == -EBUSY)
> + continue;
> +
> + return err;
> + }
> +
> + if (err == 0)
> + return -EPROTO;
> +
> + switch (msg.reply & DP_AUX_NATIVE_REPLY_MASK) {
> + case DP_AUX_NATIVE_REPLY_ACK:
> + return err;
> +
> + case DP_AUX_NATIVE_REPLY_NACK:
> + return -EIO;
> +
> + case DP_AUX_NATIVE_REPLY_DEFER:
> + usleep_range(400, 500);
> + break;
> + }
> + }
> +
> + DRM_ERROR("too many retries, giving up\n");
> + return -EIO;
> +}
> +EXPORT_SYMBOL(drm_dp_dpcd_read);
> +
> +/**
> + * drm_dp_dpcd_write() - write a series of bytes to the DPCD
> + * @aux: DisplayPort AUX channel
> + * @offset: address of the (first) register to write
> + * @buffer: buffer containing the values to write
> + * @size: number of bytes in @buffer
> + *
> + * Returns the number of bytes transferred on success, or a negative error
> + * code on failure.
> + */
> +ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset,
> + void *buffer, size_t size)
> +{
> + struct drm_dp_aux_msg msg;
> + unsigned int retry;
> + int err;
> +
> + memset(&msg, 0, sizeof(msg));
> + msg.address = offset;
> + msg.request = DP_AUX_NATIVE_WRITE;
> + msg.buffer = buffer;
> + msg.size = size;
> +
> + /*
> + * The specification doesn't give any recommendation on how often to
> + * retry native transactions, so retry 7 times like for I2C-over-AUX
> + * transactions.
> + */
> + for (retry = 0; retry < 7; retry++) {
> + err = aux->transfer(aux, &msg);
> + if (err < 0) {
> + if (err == -EBUSY)
> + continue;
> +
> + return err;
> + }
> +
> + if (err == 0)
> + return -EPROTO;
> +
> + switch (msg.reply & DP_AUX_NATIVE_REPLY_MASK) {
> + case DP_AUX_NATIVE_REPLY_ACK:
> + return 0;
> +
> + case DP_AUX_NATIVE_REPLY_NACK:
> + return -EIO;
> +
> + case DP_AUX_NATIVE_REPLY_DEFER:
> + usleep_range(400, 500);
> + break;
> + }
> + }
> +
> + DRM_ERROR("too many retries, giving up\n");
> + return -EIO;
> +}
> +EXPORT_SYMBOL(drm_dp_dpcd_write);
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index c873f9ce5871..0b14e799cd98 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -397,4 +397,68 @@ drm_dp_enhanced_frame_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
> (dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP);
> }
>
> +/*
> + * DisplayPort AUX channel
> + */
> +
> +/**
> + * struct drm_dp_aux_msg - DisplayPort AUX channel transaction
> + * @address: address of the (first) register to access
> + * @flags: contains the type of transaction as well as flags (see above)
> + * @reply: upon completion, contains the reply type of the transaction
> + * @buffer: pointer to a transmission or reception buffer
> + * @size: size of @buffer
> + */
> +struct drm_dp_aux_msg {
> + unsigned int address;
> + u8 request;
> + u8 reply;
> + void *buffer;
> + size_t size;
> +};
> +
> +/**
> + * struct drm_dp_aux - DisplayPort AUX channel
> + * @transfer: transfers a message representing a single AUX transaction
> + */
> +struct drm_dp_aux {
> + ssize_t (*transfer)(struct drm_dp_aux *aux,
> + struct drm_dp_aux_msg *msg);
> +};
> +
> +ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
> + void *buffer, size_t size);
> +ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset,
> + void *buffer, size_t size);
> +
> +/**
> + * drm_dp_dpcd_readb() - read a single byte from the DPCD
> + * @aux: DisplayPort AUX channel
> + * @offset: address of the register to read
> + * @valuep: location where the value of the register will be stored
> + *
> + * Returns the number of bytes transferred (1) on success, or a negative
> + * error code on failure.
> + */
> +static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux,
> + unsigned int offset, u8 *valuep)
> +{
> + return drm_dp_dpcd_read(aux, offset, valuep, 1);
> +}
> +
> +/**
> + * drm_dp_dpcd_writeb() - write a single byte to the DPCD
> + * @aux: DisplayPort AUX channel
> + * @offset: address of the register to write
> + * @valuep: value to write to the register
> + *
> + * Returns the number of bytes transferred (1) on success, or a negative
> + * error code on failure.
> + */
> +static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, u8 value,
> + unsigned int offset)
I'd much prefer offset before value parameter. Why would you have these
the other way around here than in all the other functions?
BR,
Jani.
> +{
> + return drm_dp_dpcd_write(aux, offset, &value, 1);
> +}
> +
> #endif /* _DRM_DP_HELPER_H_ */
> --
> 1.8.4.2
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
