Need to wait to enable cg and pg until after
ring tests. Also make sure interrupts are enabled
before we enable thermal interrupts.
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/radeon/radeon_asic.c | 1 +
drivers/gpu/drm/radeon/radeon_asic.h | 1 +
drivers/gpu/drm/radeon/trinity_dpm.c | 22 ++++++++++++++++++++++
3 files changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index 236afdd..2011a7e 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1790,6 +1790,7 @@ static struct radeon_asic trinity_asic = {
.init = &trinity_dpm_init,
.setup_asic = &trinity_dpm_setup_asic,
.enable = &trinity_dpm_enable,
+ .late_enable = &trinity_dpm_late_enable,
.disable = &trinity_dpm_disable,
.pre_set_power_state = &trinity_dpm_pre_set_power_state,
.set_power_state = &trinity_dpm_set_power_state,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 1e7d669..597daec 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -613,6 +613,7 @@ int ni_dpm_force_performance_level(struct radeon_device *rdev,
bool ni_dpm_vblank_too_short(struct radeon_device *rdev);
int trinity_dpm_init(struct radeon_device *rdev);
int trinity_dpm_enable(struct radeon_device *rdev);
+int trinity_dpm_late_enable(struct radeon_device *rdev);
void trinity_dpm_disable(struct radeon_device *rdev);
int trinity_dpm_pre_set_power_state(struct radeon_device *rdev);
int trinity_dpm_set_power_state(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/trinity_dpm.c b/drivers/gpu/drm/radeon/trinity_dpm.c
index d700698..ee0ce0a 100644
--- a/drivers/gpu/drm/radeon/trinity_dpm.c
+++ b/drivers/gpu/drm/radeon/trinity_dpm.c
@@ -1121,6 +1121,28 @@ int trinity_dpm_enable(struct radeon_device *rdev)
return 0;
}
+int trinity_dpm_late_enable(struct radeon_device *rdev)
+{
+ int ret;
+
+ trinity_acquire_mutex(rdev);
+ trinity_enable_clock_power_gating(rdev);
+
+ if (rdev->irq.installed &&
+ r600_is_internal_thermal_sensor(rdev->pm.int_thermal_type)) {
+ ret = trinity_set_thermal_temperature_range(rdev, R600_TEMP_RANGE_MIN, R600_TEMP_RANGE_MAX);
+ if (ret) {
+ trinity_release_mutex(rdev);
+ return ret;
+ }
+ rdev->irq.dpm_thermal = true;
+ radeon_irq_set(rdev);
+ }
+ trinity_release_mutex(rdev);
+
+ return 0;
+}
+
void trinity_dpm_disable(struct radeon_device *rdev)
{
trinity_acquire_mutex(rdev);
--
1.8.3.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
