Make sure interrupts are enabled
before we enable thermal interrupts.
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/radeon/radeon_asic.c | 1 +
drivers/gpu/drm/radeon/radeon_asic.h | 1 +
drivers/gpu/drm/radeon/si_dpm.c | 22 ++++++++++++++++++++++
3 files changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index 2011a7e..23df62f 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1921,6 +1921,7 @@ static struct radeon_asic si_asic = {
.init = &si_dpm_init,
.setup_asic = &si_dpm_setup_asic,
.enable = &si_dpm_enable,
+ .late_enable = &si_dpm_late_enable,
.disable = &si_dpm_disable,
.pre_set_power_state = &si_dpm_pre_set_power_state,
.set_power_state = &si_dpm_set_power_state,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 597daec..9489ee3 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -673,6 +673,7 @@ int si_get_temp(struct radeon_device *rdev);
int si_dpm_init(struct radeon_device *rdev);
void si_dpm_setup_asic(struct radeon_device *rdev);
int si_dpm_enable(struct radeon_device *rdev);
+int si_dpm_late_enable(struct radeon_device *rdev);
void si_dpm_disable(struct radeon_device *rdev);
int si_dpm_pre_set_power_state(struct radeon_device *rdev);
int si_dpm_set_power_state(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index 2d0e94a..1c547b0 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -5912,6 +5912,28 @@ int si_dpm_enable(struct radeon_device *rdev)
return 0;
}
+int si_dpm_late_enable(struct radeon_device *rdev)
+{
+ int ret;
+
+ if (rdev->irq.installed &&
+ r600_is_internal_thermal_sensor(rdev->pm.int_thermal_type)) {
+ PPSMC_Result result;
+
+ ret = si_set_thermal_temperature_range(rdev, R600_TEMP_RANGE_MIN, R600_TEMP_RANGE_MAX);
+ if (ret)
+ return ret;
+ rdev->irq.dpm_thermal = true;
+ radeon_irq_set(rdev);
+ result = si_send_msg_to_smc(rdev, PPSMC_MSG_EnableThermalInterrupt);
+
+ if (result != PPSMC_Result_OK)
+ DRM_DEBUG_KMS("Could not enable thermal interrupts.\n");
+ }
+
+ return 0;
+}
+
void si_dpm_disable(struct radeon_device *rdev)
{
struct rv7xx_power_info *pi = rv770_get_pi(rdev);
--
1.8.3.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
