Re: [PATCH 1/3] [VPG HSW-A] drm/i915: Add aspect ratio in drm_display_mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Aug-15-2013 12:36 PM, Ville Syrjälä wrote:
> On Thu, Aug 15, 2013 at 10:29:01AM +0530, vandana.kannan@xxxxxxxxx wrote:
>> From: vkannan <vandana.kannan@xxxxxxxxx>
>>
>> Mode is the video format, which is the information the sink needs to
>> properly display an image. a complete definition of video format includes
>> video timing, picture aspect ratio, color space, quantization range,
>> component depth.
>>
>> video format timing may be associated with more than 1 video format
>> for example, 720x480p formatted in the 4:3 Picture Aspect Ratio or a
>> 720x480p formatted in the 16:9 Picture Aspect Ratio.
>>
>> For HDMI compliance, a set of CEA modes are tested (CEA 861-D table 3).
>> This list has 64 modes. When one of the modes are set, the corresponding
>> fields should show up correctly (as mentioned in Table 3 of CEA spec).
>> For picture aspect ratio, if the mode is found from the CEA mode list,
>> the corresponding PAR is sent as part of infoframe. If the mode to be set
>> is not part of the CEA mode list, PAR is calculated from resolution.
>>
>> CEA modes have a specific picture aspect ratio. Adding this field
>> as part of drm_display_mode. This is required to be sent as part of AVI
>> infoframe for HDMI compliance.
> 
>>
>> Signed-off-by: Vandana Kannan <vandana.kannan@xxxxxxxxx>
>> ---
>>  drivers/gpu/drm/drm_edid.c              |  374 ++++++++++++++++++-------------
>>  drivers/gpu/drm/gma500/oaktrail_lvds.c  |   14 +-
>>  drivers/gpu/drm/gma500/psb_intel_sdvo.c |   38 ++--
>>  drivers/gpu/drm/i915/intel_display.c    |    3 +-
>>  drivers/gpu/drm/i915/intel_sdvo.c       |   38 ++--
>>  include/drm/drm_crtc.h                  |    7 +-
>>  6 files changed, 265 insertions(+), 209 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
>> index e8d17ee..83e2fda 100644
>> --- a/drivers/gpu/drm/drm_edid.c
>> +++ b/drivers/gpu/drm/drm_edid.c
>> @@ -135,378 +135,379 @@ static const struct drm_display_mode drm_dmt_modes[] = {
>>  	/* 640x350@85Hz */
>>  	{ DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 31500, 640, 672,
>>  		   736, 832, 0, 350, 382, 385, 445, 0,
>> -		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
>> +		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC, 0) },
> <snip a lot of the same>
>> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
>> index 9779ea1..07c0d58 100644
>> --- a/include/drm/drm_crtc.h
>> +++ b/include/drm/drm_crtc.h
>> @@ -30,6 +30,7 @@
>>  #include <linux/types.h>
>>  #include <linux/idr.h>
>>  #include <linux/fb.h>
>> +#include <linux/hdmi.h>
>>  #include <drm/drm_mode.h>
>>  
>>  #include <drm/drm_fourcc.h>
>> @@ -115,12 +116,14 @@ enum drm_mode_status {
>>  #define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
>>  				    DRM_MODE_TYPE_CRTC_C)
>>  
>> -#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
>> +#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f, \
>> +	ar) \
>>  	.name = nm, .status = 0, .type = (t), .clock = (c), \
>>  	.hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
>>  	.htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
>>  	.vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
>>  	.vscan = (vs), .flags = (f), \
>> +	.picture_aspect_ratio = (ar), \
>>  	.base.type = DRM_MODE_OBJECT_MODE
>>  
>>  #define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */
>> @@ -177,6 +180,8 @@ struct drm_display_mode {
>>  
>>  	int vrefresh;		/* in Hz */
>>  	int hsync;		/* in kHz */
>> +
>> +	enum hdmi_picture_aspect picture_aspect_ratio;
>>  };
> 
> I'm not sure we want to bloat drm_display_mode with additional
> junk for the sake of CEA modes. We could perhaps just have a
> separate VIC indexed array for the aspect ratio information.
> 
> At the very least we don't want to modify DRM_MODE() since that makes
> this patch needlessly large, and makes DRM_MODE() even harder to decode
> for humans. Instead you can just use c99 initializers and do it like so:
> 
>   { DRM_MODE(...),
>     .picture_aspect_ratio = x },
> 
>>  
>>  enum drm_connector_status {
>> -- 
>> 1.7.9.5
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
I am working on making changes such that cea_modes looks like
   { DRM_MODE(...),
     .picture_aspect_ratio = x },
Will push the patch soon. Please let me know if there are any concerns.
-Vandana
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux