On Thu, Aug 15, 2013 at 10:29:01AM +0530, vandana.kannan@xxxxxxxxx wrote:
> From: vkannan <vandana.kannan@xxxxxxxxx>
>
> Mode is the video format, which is the information the sink needs to
> properly display an image. a complete definition of video format includes
> video timing, picture aspect ratio, color space, quantization range,
> component depth.
>
> video format timing may be associated with more than 1 video format
> for example, 720x480p formatted in the 4:3 Picture Aspect Ratio or a
> 720x480p formatted in the 16:9 Picture Aspect Ratio.
>
> For HDMI compliance, a set of CEA modes are tested (CEA 861-D table 3).
> This list has 64 modes. When one of the modes are set, the corresponding
> fields should show up correctly (as mentioned in Table 3 of CEA spec).
> For picture aspect ratio, if the mode is found from the CEA mode list,
> the corresponding PAR is sent as part of infoframe. If the mode to be set
> is not part of the CEA mode list, PAR is calculated from resolution.
>
> CEA modes have a specific picture aspect ratio. Adding this field
> as part of drm_display_mode. This is required to be sent as part of AVI
> infoframe for HDMI compliance.
>
> Signed-off-by: Vandana Kannan <vandana.kannan@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_edid.c | 374 ++++++++++++++++++-------------
> drivers/gpu/drm/gma500/oaktrail_lvds.c | 14 +-
> drivers/gpu/drm/gma500/psb_intel_sdvo.c | 38 ++--
> drivers/gpu/drm/i915/intel_display.c | 3 +-
> drivers/gpu/drm/i915/intel_sdvo.c | 38 ++--
> include/drm/drm_crtc.h | 7 +-
> 6 files changed, 265 insertions(+), 209 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index e8d17ee..83e2fda 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -135,378 +135,379 @@ static const struct drm_display_mode drm_dmt_modes[] = {
> /* 640x350@85Hz */
> { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 31500, 640, 672,
> 736, 832, 0, 350, 382, 385, 445, 0,
> - DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
> + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC, 0) },
<snip a lot of the same>
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 9779ea1..07c0d58 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -30,6 +30,7 @@
> #include <linux/types.h>
> #include <linux/idr.h>
> #include <linux/fb.h>
> +#include <linux/hdmi.h>
> #include <drm/drm_mode.h>
>
> #include <drm/drm_fourcc.h>
> @@ -115,12 +116,14 @@ enum drm_mode_status {
> #define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
> DRM_MODE_TYPE_CRTC_C)
>
> -#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
> +#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f, \
> + ar) \
> .name = nm, .status = 0, .type = (t), .clock = (c), \
> .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
> .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
> .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
> .vscan = (vs), .flags = (f), \
> + .picture_aspect_ratio = (ar), \
> .base.type = DRM_MODE_OBJECT_MODE
>
> #define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */
> @@ -177,6 +180,8 @@ struct drm_display_mode {
>
> int vrefresh; /* in Hz */
> int hsync; /* in kHz */
> +
> + enum hdmi_picture_aspect picture_aspect_ratio;
> };
I'm not sure we want to bloat drm_display_mode with additional
junk for the sake of CEA modes. We could perhaps just have a
separate VIC indexed array for the aspect ratio information.
At the very least we don't want to modify DRM_MODE() since that makes
this patch needlessly large, and makes DRM_MODE() even harder to decode
for humans. Instead you can just use c99 initializers and do it like so:
{ DRM_MODE(...),
.picture_aspect_ratio = x },
>
> enum drm_connector_status {
> --
> 1.7.9.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
