https://bugzilla.kernel.org/show_bug.cgi?id=219888 --- Comment #3 from Alexandre Demers (alexandre.f.demers@xxxxxxxxx) --- (In reply to Alexandre Demers from comment #1) > Since I had not encountered this problem until recently (the HD7850 was > sitting as the primary GPU until my secondary GPU had to be replaced), I > tried to inverse the primary GPU (RX 5500 XT) with the secondary GPU > (HD7850). > > So, when the HD7850 sits as the primary GPU, it still doesn't output any > video on 6.13.7 and it freezes. For precision, when I say "it freezes", I mean the GPUs freeze: no output on any of the GPUs. However, I still see activity on the front light of the computer, so the kernel itself is still running. If I connect the monitor on the RX 5500 XT in this configuration (sitting as secondary GPU) before booting, the RX 5500 XT works properly until I try to connect the monitor to the HD7850 (then, no output on any GPU after that). Alexandre > > However, it works properly on 6.10.2 when sitting as primary (the HD7850 > still doesn't output anything when sitting as the secondary GPU, but it > doesn't crash. Thus, this seems be a different issue). > > I'll try to narrow it down a bit more to figure out if it was introduced > between 6.10 and 6.13. -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.