Re: [PATCH v7 12/15] drm/msm/dpu: blend pipes per mixer pairs config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 26, 2025 at 08:31:01PM +0800, Jun Nie wrote:
> Currently, only 2 pipes are used at most for a plane. A stage structure
> describes the configuration for a mixer pair. So only one stage is needed
> for current usage cases. The quad-pipe case will be added in future and 2
> stages are used in the case. So extend the stage to an array with array
> size STAGES_PER_PLANE and blend pipes per mixer pair with configuration
> in the stage structure.
> 
> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 45 +++++++++++++++++++----------
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h |  3 +-
>  2 files changed, 31 insertions(+), 17 deletions(-)
> 
> @@ -463,15 +463,24 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
>  		if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable)
>  			bg_alpha_enable = true;
>  
> -		for (i = 0; i < PIPES_PER_PLANE; i++) {
> -			if (!pstate->pipe[i].sspp)
> -				continue;
> -			set_bit(pstate->pipe[i].sspp->idx, fetch_active);
> -			_dpu_crtc_blend_setup_pipe(crtc, plane,
> -						   mixer, cstate->num_mixers,
> -						   pstate->stage,
> -						   format, fb ? fb->modifier : 0,
> -						   &pstate->pipe[i], i, stage_cfg);
> +		/* loop pipe per mixer pair with config in stage structure */
> +		for (stage = 0; stage < STAGES_PER_PLANE; stage++) {
> +			head_pipe_in_stage = stage * PIPES_PER_STAGE;
> +			for (i = 0; i < PIPES_PER_STAGE; i++) {
> +				pipe_idx = i + head_pipe_in_stage;
> +				if (!pstate->pipe[pipe_idx].sspp)
> +					continue;

empty line

> +				lms_in_pair = min(cstate->num_mixers - (stage * PIPES_PER_STAGE),
> +						  PIPES_PER_STAGE);
> +				set_bit(pstate->pipe[pipe_idx].sspp->idx, fetch_active);
> +				_dpu_crtc_blend_setup_pipe(crtc, plane,
> +							   &mixer[head_pipe_in_stage],
> +							   lms_in_pair,
> +							   pstate->stage,
> +							   format, fb ? fb->modifier : 0,
> +							   &pstate->pipe[pipe_idx], i,
> +							   &stage_cfg[stage]);
> +			}
>  		}
>  
>  		/* blend config update */

[...]

> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index 5f010d36672cc6440c69779908b315aab285eaf0..74bf3ab9d6cfb8152b32d89a6c66e4d92d5cee1d 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -34,8 +34,9 @@
>  #define DPU_MAX_PLANES			4
>  #endif
>  
> -#define PIPES_PER_PLANE			2
> +#define STAGES_PER_PLANE		1
>  #define PIPES_PER_STAGE			2
> +#define PIPES_PER_PLANE			(PIPES_PER_STAGE * STAGES_PER_PLANE)

PLease move this to the previous patch.

With that fixed:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

>  #ifndef DPU_MAX_DE_CURVES
>  #define DPU_MAX_DE_CURVES		3
>  #endif
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux