Type-C DisplayPort inoperable due to incorrect porch settings.
- Re-used wide_bus_en as flag to prevent porch shifting
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: James A. MacInnes <james.a.macinnes@xxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index abd6600046cb..a21addc4794f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -94,17 +94,21 @@ static void drm_mode_to_intf_timing_params(
timing->vsync_polarity = 0;
}
- /* for DP/EDP, Shift timings to align it to bottom right */
- if (phys_enc->hw_intf->cap->type == INTF_DP) {
+ timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent);
+ timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent);
+
+ /*
+ * For DP/EDP, Shift timings to align it to bottom right.
+ * wide_bus_en is set for everything excluding SDM845 &
+ * porch changes cause DisplayPort failure and HDMI tearing.
+ */
+ if (phys_enc->hw_intf->cap->type == INTF_DP && timing->wide_bus_en) {
timing->h_back_porch += timing->h_front_porch;
timing->h_front_porch = 0;
timing->v_back_porch += timing->v_front_porch;
timing->v_front_porch = 0;
}
- timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent);
- timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent);
-
/*
* for DP, divide the horizonal parameters by 2 when
* widebus is enabled
--
2.43.0
