On 2/10/2025 3:19 PM, Marijn Suijten wrote:
What used to be the input_10_bits boolean - feeding into the lowest
bit of DSC_ENC - on MSM downstream turned into an accidental OR with
the full bits_per_component number when it was ported to the upstream
kernel.
On typical bpc=8 setups we don't notice this because line_buf_depth is
always an odd value (it contains bpc+1) and will also set the 4th bit
after left-shifting by 3 (hence this |= bits_per_component is a no-op).
Now that guards are being removed to allow more bits_per_component
values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use
DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with
the 5th bit which is convert_rgb. This is "fortunately" also always set
to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12
starts being used it'll write into simple_422 which is normally false.
To solve all these overlaps, simply replicate downstream code and only
set this lowest bit if bits_per_component is equal to 10. It is unclear
why DSC requires this only for bpc=10 but not bpc=12, and also notice
that this lowest bit wasn't set previously despite having a panel and
patch on the list using it without any mentioned issues.
Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Good catch !
Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
