On Mon, Feb 03, 2025 at 12:39:24AM +0530, Kaustabh Chakraborty wrote:
Subject - drop driver. Bindings are about hardware. This applies to all
your bindings patches
> + clock-names:
> + items:
> + - const: oscclk
> + - const: gout_mif_cmu_mfcmscl_mfc
> + - const: gout_mif_cmu_mfcmscl_mscl
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos7870-cmu-peri
> +
Drop blank line
> + then:
> + properties:
> + clocks:
> + items:
> + - description: External reference clock (26 MHz)
> + - description: CMU_PERI bus clock (from CMU_MIF)
> + - description: SPI0 clock (from CMU_MIF)
> + - description: SPI1 clock (from CMU_MIF)
> + - description: SPI2 clock (from CMU_MIF)
> + - description: SPI3 clock (from CMU_MIF)
> + - description: SPI4 clock (from CMU_MIF)
> + - description: UART0 clock (from CMU_MIF)
> + - description: UART1 clock (from CMU_MIF)
> + - description: UART2 clock (from CMU_MIF)
> +
> + clock-names:
> + items:
> + - const: oscclk
> + - const: gout_mif_cmu_peri_bus
> + - const: gout_mif_cmu_peri_spi0
> + - const: gout_mif_cmu_peri_spi1
> + - const: gout_mif_cmu_peri_spi2
> + - const: gout_mif_cmu_peri_spi3
> + - const: gout_mif_cmu_peri_spi4
> + - const: gout_mif_cmu_peri_uart0
> + - const: gout_mif_cmu_peri_uart1
> + - const: gout_mif_cmu_peri_uart2
> +
> +required:
> + - compatible
> + - "#clock-cells"
> + - clocks
> + - clock-names
> + - reg
required block is just after properties.
> +
> +additionalProperties: false
> +
> +examples:
> + # Clock controller node for CMU_PERI
Drop
> + - |
> + #include <dt-bindings/clock/exynos7870.h>
> +
> + cmu_peri: clock-controller@101F0000 {
Lowercase hex
> + compatible = "samsung,exynos7870-cmu-peri";
> + reg = <0x101f0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "gout_mif_cmu_peri_bus",
> + "gout_mif_cmu_peri_spi0",
> + "gout_mif_cmu_peri_spi1",
> + "gout_mif_cmu_peri_spi2",
> + "gout_mif_cmu_peri_spi3",
> + "gout_mif_cmu_peri_spi4",
> + "gout_mif_cmu_peri_uart0",
> + "gout_mif_cmu_peri_uart1",
> + "gout_mif_cmu_peri_uart2";
> + clocks = <&oscclk>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_BUS>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI0>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI1>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI2>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI3>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI4>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART0>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART1>,
> + <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART2>;
> + };
> +
> +...
> --
> 2.48.1
>
