From: Hermes Wu <Hermes.wu@xxxxxxxxxx>
When connect to device which can only training done by
step training, skip auto training when link training restart,
usually happen when display resolution is changed.
Signed-off-by: Hermes Wu <Hermes.wu@xxxxxxxxxx>
---
drivers/gpu/drm/bridge/ite-it6505.c | 36 +++++++++++++++++++++---------------
1 file changed, 21 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 11231a642bbe185c4f36bf5f2a0b115fa056213b..730481a9446ff00a54ef70e86b4c28ff0a3f417e 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -468,6 +468,7 @@ struct it6505 {
struct work_struct hdcp_wait_ksv_list;
struct completion extcon_completion;
u8 auto_train_retry;
+ u8 step_train_only;
bool hdcp_desired;
bool is_repeater;
u8 hdcp_down_stream_count;
@@ -2459,11 +2460,13 @@ static void it6505_link_step_train_process(struct it6505 *it6505)
ret ? "pass" : "failed", i + 1);
if (ret) {
it6505_link_train_ok(it6505);
+ it6505->step_train_only = true;
return;
}
}
DRM_DEV_DEBUG_DRIVER(dev, "training fail");
+ it6505->step_train_only = false;
it6505->link_state = LINK_IDLE;
it6505_video_reset(it6505);
}
@@ -2479,21 +2482,23 @@ static void it6505_link_training_work(struct work_struct *work)
if (!it6505_get_sink_hpd_status(it6505))
return;
-
- retry = it6505->auto_train_retry;
- do {
- it6505_link_training_setup(it6505);
- it6505_reset_hdcp(it6505);
- it6505_aux_reset(it6505);
-
- ret = it6505_link_start_auto_train(it6505);
- DRM_DEV_DEBUG_DRIVER(dev, "auto train %s, auto_train_retry: %d",
- ret ? "pass" : "failed", it6505->auto_train_retry);
- if (ret) {
- it6505_link_train_ok(it6505);
- return;
- }
- } while (retry--);
+ /* skip auto training if previous auto train is fail*/
+ if (!it6505->step_train_only) {
+ retry = it6505->auto_train_retry;
+ do {
+ it6505_link_training_setup(it6505);
+ it6505_reset_hdcp(it6505);
+ it6505_aux_reset(it6505);
+
+ ret = it6505_link_start_auto_train(it6505);
+ DRM_DEV_DEBUG_DRIVER(dev, "auto train %s, auto_train_retry: %d",
+ ret ? "pass" : "failed", it6505->auto_train_retry);
+ if (ret) {
+ it6505_link_train_ok(it6505);
+ return;
+ }
+ } while (retry--);
+ }
/*After HW auto training fail, try link training step by step*/
it6505_link_step_train_process(it6505);
@@ -2605,6 +2610,7 @@ static void it6505_irq_hpd(struct it6505 *it6505)
it6505_parse_link_capabilities(it6505);
}
it6505->auto_train_retry = AUTO_TRAIN_RETRY;
+ it6505->step_train_only = false;
it6505_drm_dp_link_set_power(&it6505->aux, &it6505->link,
DP_SET_POWER_D0);
--
2.34.1
