Re: [PATCH v4 0/7] Support for GPU ACD feature on Adreno X1-85

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks,

Tested-by: Maya Matuszczyk <maccraft123mc@xxxxxxxxx>

śr., 8 sty 2025 o 21:40 Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx> napisał(a):
>
> This series adds support for ACD feature for Adreno GPU which helps to
> lower the power consumption on GX rail and also sometimes is a requirement
> to enable higher GPU frequencies. At high level, following are the
> sequences required for ACD feature:
>         1. Identify the ACD level data for each regulator corner
>         2. Send a message to AOSS to switch voltage plan
>         3. Send a table with ACD level information to GMU during every
>         gpu wake up
>
> For (1), it is better to keep ACD level data in devicetree because this
> value depends on the process node, voltage margins etc which are
> chipset specific. For instance, same GPU HW IP on a different chipset
> would have a different set of values. So, a new schema which extends
> opp-v2 is created to add a new property called "qcom,opp-acd-level".
>
> ACD support is dynamically detected based on the presence of
> "qcom,opp-acd-level" property in GPU's opp table. Also, qmp node should be
> present under GMU node in devicetree for communication with AOSS.
>
> The devicetree patch in this series adds the acd-level data for X1-85
> GPU present in Snapdragon X1 Elite chipset.
>
> The last two devicetree patches are for Bjorn and all the rest for
> Rob Clark.
>
> ---
> Changes in v4:
> - Send correct acd data via hfi (Neil)
> - Fix dt-bindings error
> - Fix IB vote for the 1.1Ghz OPP
> - New patch#2 to fix the HFI timeout error seen when ACD is enabled
> - Link to v3: https://lore.kernel.org/r/20241231-gpu-acd-v3-0-3ba73660e9ca@xxxxxxxxxxx
>
> Changes in v3:
> - Rebased on top of v6.13-rc4 since X1E doesn't boot properly with msm-next
> - Update patternProperties regex (Krzysztof)
> - Update MAINTAINERS file include the new opp-v2-qcom-adreno.yaml
> - Update the new dt properties' description
> - Do not move qmp_get() to acd probe (Konrad)
> - New patches: patch#2, #3 and #6
> - Link to v2: https://lore.kernel.org/r/20241021-gpu-acd-v2-0-9c25a62803bc@xxxxxxxxxxx
>
> Changes in v2:
> - Removed RFC tag for the series
> - Improve documentation for the new dt bindings (Krzysztof)
> - Add fallback compatible string for opp-table (Krzysztof)
> - Link to v1: https://lore.kernel.org/r/20241012-gpu-acd-v1-0-1e5e91aa95b6@xxxxxxxxxxx
>
> ---
> Akhil P Oommen (7):
>       drm/msm/adreno: Add support for ACD
>       drm/msm/a6xx: Increase HFI response timeout
>       drm/msm: a6x: Rework qmp_get() error handling
>       drm/msm/adreno: Add module param to disable ACD
>       dt-bindings: opp: Add v2-qcom-adreno vendor bindings
>       arm64: dts: qcom: x1e80100: Add ACD levels for GPU
>       arm64: dts: qcom: x1e80100: Add OPPs up to Turbo L3 for GPU
>
>  .../bindings/opp/opp-v2-qcom-adreno.yaml           | 97 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi             | 27 +++++-
>  drivers/gpu/drm/msm/adreno/a6xx_gmu.c              | 96 ++++++++++++++++++---
>  drivers/gpu/drm/msm/adreno/a6xx_gmu.h              |  1 +
>  drivers/gpu/drm/msm/adreno/a6xx_hfi.c              | 38 ++++++++-
>  drivers/gpu/drm/msm/adreno/a6xx_hfi.h              | 21 +++++
>  drivers/gpu/drm/msm/adreno/adreno_device.c         |  4 +
>  8 files changed, 270 insertions(+), 15 deletions(-)
> ---
> base-commit: dbfac60febfa806abb2d384cb6441e77335d2799
> change-id: 20240724-gpu-acd-6c1dc5dcf516
>
> Best regards,
> --
> Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
>




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux