[PATCH v2 3/3] drm/mxsfb: add DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to drm_bridge_attach

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit a25b988ff83f ("drm/bridge: Extend bridge API to disable connector creation")
added DRM_BRIDGE_ATTACH_NO_CONNECTOR bridge flag and all bridges handle
this flag in some way since then.
Newly added bridge drivers must no longer contain the connector creation and
will fail probing if this flag isn't set.

In order to be able to connect to those newly added bridges as well,
make use of drm_bridge_connector API and have the connector initialized
by the display controller.

Based on 2e87bf389e13 ("drm/rockchip: add DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to drm_bridge_attach")

This makes LT9611 work with i.MX8M Mini.

Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
Cc: Jonas Karlman <jonas@xxxxxxxxx>
Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Liu Ying <victor.liu@xxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Cc: Maxime Ripard <mripard@xxxxxxxxxx>
Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Robert Foss <rfoss@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Simona Vetter <simona@xxxxxxxx>
Cc: Stefan Agner <stefan@xxxxxxxx>
Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: imx@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
---
V2: Cache connector from drm_bridge_connector_init()
---
 drivers/gpu/drm/mxsfb/Kconfig     |  1 +
 drivers/gpu/drm/mxsfb/mxsfb_drv.c | 37 ++++++++++++++++++++++---------
 2 files changed, 27 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/Kconfig b/drivers/gpu/drm/mxsfb/Kconfig
index 07fb6901996ae..e67de148955b2 100644
--- a/drivers/gpu/drm/mxsfb/Kconfig
+++ b/drivers/gpu/drm/mxsfb/Kconfig
@@ -12,6 +12,7 @@ config DRM_MXSFB
 	select DRM_CLIENT_SELECTION
 	select DRM_MXS
 	select DRM_KMS_HELPER
+	select DRM_BRIDGE_CONNECTOR
 	select DRM_GEM_DMA_HELPER
 	select DRM_PANEL
 	select DRM_PANEL_BRIDGE
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index 59020862cf65e..2f205512f3105 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -20,6 +20,7 @@
 #include <drm/clients/drm_client_setup.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_connector.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fbdev_dma.h>
@@ -119,9 +120,9 @@ static const struct drm_mode_config_helper_funcs mxsfb_mode_config_helpers = {
 static int mxsfb_attach_bridge(struct mxsfb_drm_private *mxsfb)
 {
 	struct drm_device *drm = mxsfb->drm;
-	struct drm_connector_list_iter iter;
-	struct drm_panel *panel;
+	struct drm_connector *connector;
 	struct drm_bridge *bridge;
+	struct drm_panel *panel;
 	int ret;
 
 	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0, &panel,
@@ -139,21 +140,35 @@ static int mxsfb_attach_bridge(struct mxsfb_drm_private *mxsfb)
 	if (!bridge)
 		return -ENODEV;
 
-	ret = drm_bridge_attach(&mxsfb->encoder, bridge, NULL, 0);
+	ret = drm_bridge_attach(&mxsfb->encoder, bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret)
 		return dev_err_probe(drm->dev, ret, "Failed to attach bridge\n");
 
-	mxsfb->bridge = bridge;
+	connector = drm_bridge_connector_init(drm, &mxsfb->encoder);
+	if (IS_ERR(connector)) {
+		ret = PTR_ERR(connector);
+		dev_err_probe(drm->dev, ret,
+			      "Failed to initialize bridge connector: %pe\n",
+			      connector);
+		return ret;
+	}
 
-	/*
-	 * Get hold of the connector. This is a bit of a hack, until the bridge
-	 * API gives us bus flags and formats.
-	 */
-	drm_connector_list_iter_begin(drm, &iter);
-	mxsfb->connector = drm_connector_list_iter_next(&iter);
-	drm_connector_list_iter_end(&iter);
+	ret = drm_connector_attach_encoder(connector, &mxsfb->encoder);
+	if (ret < 0) {
+		dev_err_probe(drm->dev, ret,
+			      "Failed to attach encoder.\n");
+		goto err_cleanup_connector;
+	}
+
+	mxsfb->bridge = bridge;
+	mxsfb->connector = connector;
 
 	return 0;
+
+err_cleanup_connector:
+	drm_connector_cleanup(connector);
+	return ret;
 }
 
 static irqreturn_t mxsfb_irq_handler(int irq, void *data)
-- 
2.45.2




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux