The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
The output_port set to 1 makes the DW HDMI driver core look up the
next bridge in DT, where the next bridge is often the hdmi-connector .
Similar to 0af5e0b41110 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR")
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
Cc: Jonas Karlman <jonas@xxxxxxxxx>
Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Liu Ying <victor.liu@xxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Cc: Maxime Ripard <mripard@xxxxxxxxxx>
Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Robert Foss <rfoss@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Simona Vetter <simona@xxxxxxxx>
Cc: Stefan Agner <stefan@xxxxxxxx>
Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: imx@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
---
drivers/gpu/drm/bridge/imx/Kconfig | 1 +
drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index 9a480c6abb856..d8e9fbf75edbb 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -27,6 +27,7 @@ config DRM_IMX8MP_DW_HDMI_BRIDGE
config DRM_IMX8MP_HDMI_PVI
tristate "Freescale i.MX8MP HDMI PVI bridge support"
depends on OF
+ select DRM_DISPLAY_CONNECTOR
help
Choose this to enable support for the internal HDMI TX Parallel
Video Interface found on the Freescale i.MX8MP SoC.
diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
index 1e7a789ec2890..4ebae5ad072ad 100644
--- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
+++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
@@ -101,6 +101,7 @@ static int imx8mp_dw_hdmi_probe(struct platform_device *pdev)
plat_data->phy_name = "SAMSUNG HDMI TX PHY";
plat_data->priv_data = hdmi;
plat_data->phy_force_vendor = true;
+ plat_data->output_port = 1;
hdmi->dw_hdmi = dw_hdmi_probe(pdev, plat_data);
if (IS_ERR(hdmi->dw_hdmi))
--
2.45.2
