On Tue, 19 Nov 2024 08:40:29 +0100, Stefan Ekenberg wrote:
> AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
> while updating Audio InfoFrame information and then set to 0 when done.
> Otherwise partially updated Audio InfoFrames could be sent out. Two
> cases where this rule were not followed are fixed:
> - In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
> before/after setting ADV7511_REG_AUDIO_INFOFRAME.
> - In audio_startup() use the correct register for clearing
> AUDIO_UPDATE bit.
>
> [...]
Applied to drm-misc-fixes, thanks!
[1/1] drm/bridge: adv7511_audio: Update Audio InfoFrame properly
commit: 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707
Best regards,
--
With best wishes
Dmitry
