Hello Jessica,
On Tue, Dec 10, 2024 at 09:45:09AM -0800, Jessica Zhang wrote:
> [...]
> > +static const struct raydium_rm67200_panel_info w552793baa_info = {
> > + .mode = {
> > + .clock = 132000,
> > + .hdisplay = 1080,
> > + .hsync_start = 1095,
> > + .hsync_end = 1125,
> > + .htotal = 1129,
> > + .vdisplay = 1920,
> > + .vsync_start = 1935,
> > + .vsync_end = 1950,
> > + .vtotal = 1952,
> > + .width_mm = 68, /* 68.04mm */
> > + .height_mm = 121, /* 120.96mm */
> > + .type = DRM_MODE_TYPE_DRIVER,
> > + },
> > + .regulators = w552793baa_regulators,
> > + .num_regulators = ARRAY_SIZE(w552793baa_regulators),
> > + .panel_setup = w552793baa_setup,
>
> Just curious, will there be other panels with different regulators and init
> commands added for this driver in the future?
I don't know any other RM67200 based panels. But the init sequence
contains lots of vendor specific registers and I'm pretty sure it
is specific to the W552793BAA. I put the regulators into the panel
specific section, because the datasheet for the RM67200 specifies
slightly different ones than the w552793baa datasheet. Thus I expect
that other displays might have slight differences.
Greetings,
-- Sebastian
Attachment:
signature.asc
Description: PGP signature
