On 12/4/2024 1:39 AM, Chen-Yu Tsai wrote:
drm_panel_init() was made to initialize the fields in |struct drm_panel|.
There is no need to separately initialize them again.
Drop the separate assignments that are redundant. Also fix up any uses
of `ctx->panel.dev` to use `dev` directly.
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Reviewed-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
Changes since v1:
- Also fix uses of `ctx->panel.dev`
drivers/gpu/drm/panel/panel-visionox-rm69299.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
index 272490b9565b..be3a9797fbce 100644
--- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c
+++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
@@ -193,7 +193,6 @@ static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
mipi_dsi_set_drvdata(dsi, ctx);
- ctx->panel.dev = dev;
ctx->dsi = dsi;
ctx->supplies[0].supply = "vdda";
@@ -201,13 +200,11 @@ static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
ctx->supplies[1].supply = "vdd3p3";
ctx->supplies[1].init_load_uA = 13200;
- ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
- ctx->supplies);
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), ctx->supplies);
if (ret < 0)
return ret;
- ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev,
- "reset", GPIOD_OUT_LOW);
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset gpio %ld\n", PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
@@ -215,8 +212,6 @@ static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
DRM_MODE_CONNECTOR_DSI);
- ctx->panel.dev = dev;
- ctx->panel.funcs = &visionox_rm69299_drm_funcs;
drm_panel_add(&ctx->panel);
dsi->lanes = 4;
--
2.47.0.338.g60cca15819-goog
