On Sun, 24 Nov 2024 at 17:00, Florian Fainelli <florian.fainelli@xxxxxxxxxxxx> wrote: > > > > On 11/22/2024 12:06 AM, Maxime Ripard wrote: > > On Thu, Nov 21, 2024 at 03:37:00PM +0000, Dave Stevenson wrote: > >> On Wed, 23 Oct 2024 at 17:50, Dave Stevenson > >> <dave.stevenson@xxxxxxxxxxxxxxx> wrote: > >>> > >>> This series adds the required DRM, clock, and DT changes > >>> required to support the display hardware on Pi5. > >>> There are a couple of minor fixes first before the main patches. > >>> > >>> Many of the patches were authored by Maxime whilst working > >>> for us, however there have been a number of fixes squashed > >>> into his original patches as issues have been found. I also > >>> reworked the way UBM allocations are done to avoid double > >>> buffering of the handles as they are quite a limited resource. > >>> > >>> There are 2 variants of the IP. Most Pi5's released to date > >>> have used the C1 step of the SoC, whilst the 2GB Pi5 released > >>> in August is using the D0 step, as will other boards in future. > >>> > >>> Due to various reasons the register map got reworked between > >>> the steps, so there is extra code to handle the differences. > >>> Which step is in use is read out of the hardware, so they > >>> share a compatible string. > >> > >> A gentle ping on the patches for clk-raspberrypi (patches 29-33) and > >> Broadcom DT (patches 34-36). > >> > >> All the DRM and dtbinding ones are reviewed or acked (thank you!). > > > > If the bindings and DRM patches are all merged, you can merge these at > > least. > > I will be taking in the DTS patche shortly. Thanks! Thank you Florian and Stephen. I messed up and pinged the v1 cover note :( V2 is https://lore.kernel.org/linux-arm-kernel/20241025-drm-vc4-2712-support-v2-0-35efa83c8fc0@xxxxxxxxxxxxxxx/ Thank you Florian for grabbing the correct version anyway, although there weren't any changes to the DT side anyway. V2 includes fixing Maxime's comment on "[PATCH 31/37] clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks" that Stephen also commented on. Stephen: Sorry, maintaining newbie, particularly for clocks. I see in linux-clk patchwork they are marked as "Awaiting Upstream". What, if anything, do I need to do on those? I've pushed the v2 DRM patches with dtbindings, so the clock changes are the only ones left. Thanks again. Dave > -- > Florian >
