Hi Damon,
Am Mittwoch, 27. November 2024, 08:51:57 CET schrieb Damon Ding:
> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board.
>
> Signed-off-by: Damon Ding <damon.ding@xxxxxxxxxxxxxx>
> ---
> .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 84 +++++++++++++++++++
> 1 file changed, 84 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> index bc4077575beb..67c2e6d1bece 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> @@ -9,6 +9,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> #include <dt-bindings/usb/pd.h>
> #include "rk3588s.dtsi"
>
> @@ -116,10 +117,56 @@ masterdai: simple-audio-card,codec {
>
> backlight: backlight {
> compatible = "pwm-backlight";
> + brightness-levels = <
> + 0 1 2 3 4 5 6 7
> + 8 9 10 11 12 13 14 15
> + 16 17 18 19 20 21 22 23
> + 24 25 26 27 28 29 30 31
> + 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47
> + 48 49 50 51 52 53 54 55
> + 56 57 58 59 60 61 62 63
> + 64 65 66 67 68 69 70 71
> + 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87
> + 88 89 90 91 92 93 94 95
> + 96 97 98 99 100 101 102 103
> + 104 105 106 107 108 109 110 111
> + 112 113 114 115 116 117 118 119
> + 120 121 122 123 124 125 126 127
> + 128 129 130 131 132 133 134 135
> + 136 137 138 139 140 141 142 143
> + 144 145 146 147 148 149 150 151
> + 152 153 154 155 156 157 158 159
> + 160 161 162 163 164 165 166 167
> + 168 169 170 171 172 173 174 175
> + 176 177 178 179 180 181 182 183
> + 184 185 186 187 188 189 190 191
> + 192 193 194 195 196 197 198 199
> + 200 201 202 203 204 205 206 207
> + 208 209 210 211 212 213 214 215
> + 216 217 218 219 220 221 222 223
> + 224 225 226 227 228 229 230 231
> + 232 233 234 235 236 237 238 239
> + 240 241 242 243 244 245 246 247
> + 248 249 250 251 252 253 254 255>;
manual brightness-levels shouldn't be needed anymore and the backlight
can create those automatically.
So both the brightness-levels and default-brightness-level should be able
to go away?
> + default-brightness-level = <200>;
> power-supply = <&vcc3v3_lcd_edp>;
> pwms = <&pwm12 0 25000 0>;
> };
>
Heiko
