From: Victor Lu <victorchengchi.lu@xxxxxxx>
[ Upstream commit 8b22f048331dfd45fdfbf0efdfb1d43deff7518d ]
Port this change to vega20_ih.c:
commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")
Original commit message:
"Why:
Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit
if RB_ENABLE is not set.
How to fix:
Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set.
The RB_ENABLE bit is required to be set, together with
WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit
would clear the RB_OVERFLOW."
Signed-off-by: Victor Lu <victorchengchi.lu@xxxxxxx>
Reviewed-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/vega20_ih.c | 27 ++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/vega20_ih.c b/drivers/gpu/drm/amd/amdgpu/vega20_ih.c
index ac439f0565e35..16f5561fb86ec 100644
--- a/drivers/gpu/drm/amd/amdgpu/vega20_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/vega20_ih.c
@@ -114,6 +114,33 @@ static int vega20_ih_toggle_ring_interrupts(struct amdgpu_device *adev,
tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, RB_ENABLE, (enable ? 1 : 0));
tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, RB_GPU_TS_ENABLE, 1);
+ if (enable) {
+ /* Unset the CLEAR_OVERFLOW bit to make sure the next step
+ * is switching the bit from 0 to 1
+ */
+ tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 0);
+ if (amdgpu_sriov_vf(adev) && amdgpu_sriov_reg_indirect_ih(adev)) {
+ if (psp_reg_program(&adev->psp, ih_regs->psp_reg_id, tmp))
+ return -ETIMEDOUT;
+ } else {
+ WREG32_NO_KIQ(ih_regs->ih_rb_cntl, tmp);
+ }
+
+ /* Clear RB_OVERFLOW bit */
+ tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
+ if (amdgpu_sriov_vf(adev) && amdgpu_sriov_reg_indirect_ih(adev)) {
+ if (psp_reg_program(&adev->psp, ih_regs->psp_reg_id, tmp))
+ return -ETIMEDOUT;
+ } else {
+ WREG32_NO_KIQ(ih_regs->ih_rb_cntl, tmp);
+ }
+
+ /* Unset the CLEAR_OVERFLOW bit immediately so new overflows
+ * can be detected.
+ */
+ tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 0);
+ }
+
/* enable_intr field is only valid in ring0 */
if (ih == &adev->irq.ih)
tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, ENABLE_INTR, (enable ? 1 : 0));
--
2.43.0
