From: Li Liu <quic_lliu6@xxxxxxxxxxx> Document the MDSS and DPU hardware found on the Qualcomm SM6150 platform. Signed-off-by: Li Liu <quic_lliu6@xxxxxxxxxxx> Signed-off-by: Fange Zhang <quic_fangez@xxxxxxxxxxx> --- .../bindings/display/msm/qcom,sm6150-dpu.yaml | 113 ++++++++++ .../bindings/display/msm/qcom,sm6150-mdss.yaml | 250 +++++++++++++++++++++ 2 files changed, 363 insertions(+) diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml new file mode 100644 index 0000000000000000000000000000000000000000..b9783ebb047ed19858928bb035e61a550feecea9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6150 Display DPU + +maintainers: + - Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> + - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm6150-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display hf axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm6150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdss_mdp_clk>, + <&dispcc_mdss_vsync_clk>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc_mdss_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml new file mode 100644 index 0000000000000000000000000000000000000000..f750567fe1918d815e4af4ca214f817ca3f1c1fd --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml @@ -0,0 +1,250 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6150 Display MDSS + +maintainers: + - Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> + - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM6150 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6150-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,sm6150-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + items: + - const: qcom,sm6150-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,sm6150-dsi-phy-14nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sm6150-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", "cpu-cfg"; + + power-domains = <&dispcc_mdss_gdsc>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdss_mdp_clk>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x0>; + + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm6150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdss_mdp_clk>, + <&dispcc_mdss_vsync_clk>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc_mdss_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm6150-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc_mdss_byte0_clk>, + <&dispcc_mdss_byte0_intf_clk>, + <&dispcc_mdss_pclk0_clk>, + <&dispcc_mdss_esc0_clk>, + <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_mdss_byte0_clk_src>, + <&dispcc_mdss_pclk0_clk_src>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi0_opp_table>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm6150-dsi-phy-14nm"; + reg = <0x0ae94400 0x100>, + <0x0ae94500 0x300>, + <0x0ae94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; + }; +... -- 2.34.1
