Use new drm_bridge_connector_mode_valid() helper if there is a HDMI bridge in the bridge chain. This removes the need to perform TMDS char rate check manually in the bridge driver. Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx> Reviewed-by: Maxime Ripard <mripard@xxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- drivers/gpu/drm/display/drm_bridge_connector.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/display/drm_bridge_connector.c b/drivers/gpu/drm/display/drm_bridge_connector.c index 320c297008aaa8b6ef5b1f4c71928849b202e8ac..512ced87ea18c74e182a558a686ddd83de891814 100644 --- a/drivers/gpu/drm/display/drm_bridge_connector.c +++ b/drivers/gpu/drm/display/drm_bridge_connector.c @@ -18,6 +18,7 @@ #include <drm/drm_managed.h> #include <drm/drm_modeset_helper_vtables.h> #include <drm/drm_probe_helper.h> +#include <drm/display/drm_hdmi_helper.h> #include <drm/display/drm_hdmi_state_helper.h> /** @@ -299,9 +300,22 @@ static int drm_bridge_connector_get_modes(struct drm_connector *connector) return 0; } +static enum drm_mode_status +drm_bridge_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + + if (bridge_connector->bridge_hdmi) + return drm_hdmi_connector_mode_valid(connector, mode); + + return MODE_OK; +} + static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = { .get_modes = drm_bridge_connector_get_modes, - /* No need for .mode_valid(), the bridges are checked by the core. */ + .mode_valid = drm_bridge_connector_mode_valid, .enable_hpd = drm_bridge_connector_enable_hpd, .disable_hpd = drm_bridge_connector_disable_hpd, }; -- 2.39.5